Summary: Did the hard drive fail meaning a hardware crash? If it's failing the SMART test or having a physical problem it might take some luck to retrieve dat...
Summary: I have an old server that crashed. I need to get the data from the hard drive. Is there any way to take out the hard drive and just copy the data...
Summary: Well I haven't yet connected it. I will be slaving it to my master hard drive which runs XP SP3. So I'm confused as to your comment about it booting...
Summary: I was reading on a website that it is possible to recover data from a reformatted hard drive even after a new OS has been installed. I have a friend ...
Summary: hello. i have a problem and need an advice. i have a 160 gb hdd and it have 2 partitions ( F: and G: ). Now i have problems with G: drive as it appear...
Summary: Can anyone advise the best method for retrieving data from a pair of raid 0 drives from a dead MSI K7N2 Delta mobo system. I have a different replacem...
Summary: I've been having this problem for some time now. I have a 2nd hd by which was working just fine(100g with data on it)and one day, for some odd reason,...
Summary: if you can get the circuit boards cheap, it might be a fun project to try. otherwise i would just suggest backing up your data next time. ESPECIALLY i...
Summary: I guess buying an enclosure is certainly worth a try, though I don't see how it would actually work considering the problem seems to be with the hard ...
Summary: I had windows vista earlier installed in my PC. I installed win-XP from bootable Cd after formatting C drive where vista was installed. Now I am not g...
Summary: My hard disk recently developed errors down to bad sectors on the drive, and now windows will not boot. I tried cloning the drive to a new 500 gb hard...
Summary: It is not knowing how the hard drives works that is the problem, it is the facilities required to recover data from a drive. If the drive has suffered...
Summary: Open the case and make sure the data cable to the drive is firmly installed. Make sure the cable is in good condition. If that's not it, recovering d...
Summary: Thanks mR_Slug. Your answer was the most helpful to me. I am curious where all the "data recovery" companies get this kind of education/experience/inf...
Summary: Over the weekend I had my hard drive on main PC (running Windows XP Pro) lock up. When I rebooted, it went into Check Disk, which locked up as well. ...
Summary: I confirm all that Tubes states in the above post as I read the same article. One thing that Tubes didn't mention that was in the article is that EVE...
Summary: Mike, my PC does recognise big hard drives, I have a 60 GB drive in here already. If you read my posting properly it says I overcame that problem beca...
Summary: You can try a recovery program. On webattack.com you can find ´pc inspector recovery´ and ´diskdrive investigator´. If I´m not mistaken it´s the first...
Summary: Hi, I am trying to install a slave drive in which the bios does detect, and boots to the primary master with windows 98. Although, the slave drive ...
Summary: In response 84 you wrote: "...and noticed that the geometry of the drive was different that that of what was listed in TestDisk. So I went back into t...
Summary: If the Maxtor drive is detected by the BIOS then you should be able to recover data from the drive. You can try Knoppix which is a live version of Lin...
Summary: ================================================= SamiH, To check the hard drive just put it back in the system it came from. If it works then the h...
Summary: njha... the problem actualli lies in proken firmware, so the harddrive is not detected in bios or detected wrong, mhdd see the drive but doesnt access...
Summary: Hi Well logically you can't copy the drive until you can install it without the machine rebooting. I suspect the drive is drawing a lot of power ca...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
