Summary: What is the difference between these 3 type of Windows, which one is better, which one should I use? 1. Windows XP professional 2. Windows XP media ce...
Summary: When I first set up Xp Pro with my sis raid with ntfs the system slowly degrades (checking drives for consistancy) then removeing corrupted files. Eve...
Summary: Recently I purchased my second WD Raptor (A very nice 10,000 RPM SATA Drive). I placed the new drive into my SATA 2 position and placed a Legacy power...
Summary: When I trie to install winXP pro I receive message "no operation system found". The cause is something with my raid array (says some people on the for...
Summary: I cant get the installation program to find my RAID drive. After pressing "f6" and installing the newest Promise Fasttrack driver the installprogram t...
Summary: Hello, I seem to be getting really lousy performance from my raid setup. Here's the scoop: 2x45gig IBM Deskstar Abit Via KT7-Raid Windows XP 512 MB R...
Summary: I just upgraded to XP Pro using two 40 gig ATA 100 IBM drives on a HPT370 controler (Abit SA6R MB) and a 'RAID 0' setup. With Win 98 using same setu...
Summary: Ok, my solution to this was simple! JUST dont do anything! Install XP, dont press F6, dont use any drivers! XP has the Raid drivers included, so it sh...
Summary: I'm using a promise raid card w/xp, but let me tell you, it was no picknick getting it to install w/out locking (using the 2k drivers)... txtsetup.oe...
Summary: IS it possible to burn a copy of XP onto CD that already has RAID drivers on it so that you dont have to put in a disk anymore? Sure would be nice (es...
Summary: This was probably covered somewhere before, but, I'm lazy and don't feel like searching the forum...so... I just got a new motherboard and dual PIII/1...
Summary: Windows XP is taking a a couple of minutes to boot. There is a long blank screen before the logon screen. I have a PCI Raid card used as an extra IDE ...
Summary: have been using the above program for some time and it works great. Bought it just before they were purchased by Norton. I back up a complete image o...
Summary: Ok I'm dumb founded here, I've been running RAID striped on XP for about a year and a half now with no problems. This morning I did a normal routine o...
Summary: System specs, please, especially the motherboard. And please reassure us that you have at least 2 similar hard drives connected to the RAID controlle...
Summary: I did not to back up my hard disk data before creating RAID-0, so the result is obvious. Lost all my data. Any chance to recover the data the fastest ...
Summary: Hi, i have a p4 3.0 with a ASUS motherboard. I just bought another Western digital RAPtor hard drive. I have 2 now, one 36 and other 74. Here is w...
Summary: I have a new 250G SATA drive I want to add to my Dimension 8400 which currently has a single 80G drive (not partitioned into more than one drive). I w...
Summary: I have the following setup: Two 80 gig Mator drives with the OS and many of my main files on, running RAID 0 (striping) extra drives with the swap fil...
Summary: I have XP pro. I have two 80 GB hard drives in a RAID 0 array. I also have a 13 GB IDE drive on the system. All have NTFS as the storage type. Des...
Summary: Have supermirco MOBO P8sci with Sata raid controler 9550SX. during win XP install it will not pull the controller card drivers off the floppy drive. T...
Summary: Hey folks, I finally decided to utilize the RAID function on my TH7-RAID motherboard, and consequently I've set up 4 20g hard drives. I mana...
Summary: Can anyone guide me on how to set up a raid config on my Kr7 Abit MObo.I have a 60gig as my master and 2 40gigs that i would like to use on the raid.B...
Summary: I am new to raid, have finally figured out how to set up the array, and pressed f6 during clean install of XP. used promise raid drivers on floppy, an...
Summary: I keep getting this "SATA Raid Controler" prompt to install the software ( I believe I obtained this from Microsoft Windows Update ) But no matter wha...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
