Summary: Hi! I'm also working (BorlandC++ Builder 5) on a RS232 serial port communication under WIN32. I found informations in the WIN32 Developpers reference ...
Summary: Good day, I am trying to shutdown any computer using an external device that is connected either through the serial port or the usb port. Basically it...
Summary: I,m afraid you are barking up the wrong tree. The MSComm control is for use with Communications Ports, that means RS232 serial ports, not USB ports. ...
Summary: I would like to share the serial port of a workstation for 30 computers on our network. The software is to be loaded on each computer. Is it possible ...
Summary: This has to do with Serial Port Communications. It seems a simple task, but..... What I want to do is send a single character, lets say the letter "...
Summary: Hi there, I have little experience and find today that I am unable to connect to a remote serial port I previously could connect to. I cannot get to t...
Summary: I recently aquried a 24port 10/100 dual speed hub made by centrecom that was extremely cheap and works fine for my use. I know what the 100 BASE TX ...
Summary: Dial up modem and DSL modems are completely different things, one being analogue and the other digital. Broadband modems generally use Ethernet, somet...
Summary: I recently recieved an Epson 880 FX Dot Matrix Printer, with an epson C82307 serial card, for free from an organization upgrading to an HP LaserJet. ...
Summary: We have a number of remote devices that run WinNT and have a serial port connected to a radio modem. These devices all communicate back through a si...
Summary: I've recieved this task from my teacher at college, it is a poorly worded and I require some help with it, the task is as follows. Q1 - You are requir...
Summary: the pc card might not be, but normally, the irlan0 interface IS actually a wireless interface; it should be for the first infrared IRDA port (serial p...
Summary: Hello, I hope someone can help me. I need to transfer a great deal of data from an old 4GB HD, which is installed in my old Toshiba Tecra 550 CDT. I...
Summary: go to safe mode,open device manager,highlight nic and choose disable in this hardware profile,reboot,after it's back up, check the irq's nics like to ...
Summary: I have three PII and i would like to network them by their serial port and i do not want to network them by network cards. Please go on http://www.e...
Summary: Hi. i have two computers. I want to connect both computers together, but the ethernet card on one computer is already being used up by the cable inter...
Summary: Are you sure that the adapter is to connect ethernet to the serial (COM) port? Many manufacturers (such as CISCO) use the RJ-45 connector as a serial...
Summary: i just got a new sony grx670 laptop and i found that it doesnt have a serial port so i cant console onto my cisco routers, and i dont want to buy a po...
Summary: Hi guys: I want to hook up a peer to peer LAN in my home. I am a student, so I am thinking somthing cheap. I would like to connect them using its seri...
Summary: Hi Mad, Lizette, hi everybody According to the Specs for your Toshiba Satelite 320CDT laptop, it was originally shipped with a Xircom* Credit Card Mod...
Summary: Hello Rad: If you use a router that has a serial port (like the SMC Barricade) you can then use an external modem, get 2 NIC cards and run the PC's fr...
Summary: The easiest way is to connect the two computers directly via their serial ports. For that you need a null-modem cable to connect the two. With this ...
Summary: The 3Com 3C510 router does have a print server built in, but it is for the parallel printer port built into the router itself. In fact, the manual say...
Summary: Connecting to computer together via their modems is possible, but its slow, very slow, cumbersome and you need extra components. Not really a practic...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
