Summary: Hey thanks for the quick reply and yes it does make sense. I have figured out with the board if you don't have a 800mhz processor installed then the ...
Summary: i have a ram frequency of 166 which it says in cpuz could some1 tell me how the ram frequency works, does it depend on wat cpu u have or is it just th...
Summary: I m using Windows Vista Ultimate 64 Bit Edition. I m having probelm in RAM Frequency it's show at booting time 800 Mhz. Dual Channels But in Windows ...
Summary: I hope someone can help me with this. I previously had 1GB of DDR2 RAM (512 x 2 modules). I just upgraded to 4GB of DDR2 PC2-5300, which is the same t...
Summary: I've always left my BIOS to do all the setup work on my hardware automatically (its a phonex award bios). I was breezing through some of the advanced ...
Summary: The model number for RAM (PC2100, PC2700, etc) is the max amount of bandwidth capacity it can handle at it's default frequency. The numbers are rounde...
Summary: Did you check if the density is competable with the Ram frequency? My board hase a fsb of 400Mhz and can handle a max of 2gb Ram but not a 400 only lo...
Summary: "is the motherboard memory controller really so inefficient that it makes DDR2 at 533 lag severely behind DDR1 at 400?" You have to understand that te...
Summary: I want to check my RAM frequency,I have 2 DDR ram installed in my system,i just want to know is that both the ram are in same frequency, is there any ...
Summary: can your motherboard take the 133mhz memory? you say you were using 100mhz. if so you might have to set the ram frequency to 133 instead of 100 in BIO...
Summary: "I ran Memtest86 v3.2. I let it run for about 1hr 30min. No errors reported. " If memtest86 finds no memory errors after a couple of complete test pas...
Summary: I want to check my RAM frequency,I have 2 DDR ram installed in my system,i just want to know is that both the ram are in same frequency, is there any ...
Summary: I think it has something to do with the ram frequency that it can run at, I believe you take the pc number, so 2700 divided by 16 to get the frequency...
Summary: Just about any setting you change in the BIOS can affect performance in one way or another. This change boosted performance...it increased the RAM fre...
Summary: Yep I understand now. I checked the RAM frequency and it was set to auto, but the minmium was 266mhz and max was 400mhz or in between 333mhz. I tried ...
Summary: Sorry but you need to be schooled. Dual channel is a function of the motherboard, not the RAM. As long as you have two sticks of matched RAM installed...
Summary: 1. when mixing RAM, all sticks will run at the speed of the slowest. In other words: PC3200 + PC2700 = PC2700 2. because of inefficiencies in the P4, ...
Summary: It probably depends on what the manual means by 'support'. If it means the motherboard ram frequency can go up to 533 mhz then 667 sticks should work ...
Summary: This may make things even more confusing, but it usually makes things easier to speak in terms of frequency. Bus speeds are theoretical/advertised spe...
Summary: 1) you put the good stick of 256MB of RAM back, and see if your stability issues vanish. 2) you verify that the RAM is compatible with your mobo/BIOS....
Summary: You need to understand the the difference between advertised bus speeds & the true frequency. Intel quad-pumps the CPU FSB, but the RAM bus is only do...
Summary: I know I formatted (cleared the hd) and put the sys restore cd in to reinstall windows wx and then the error came up. Hey Jam thanks for the oc tip I ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
