Summary: Hi, im in need of help, prolly a simple answer but im a pc noob (first pc that i have built) :O. I just want some help in getting my pc 2 work properl...
Summary: ok, had a ram prob. bord can hold 2gbs put two new matched gbs in and com. wouldnt start up took one out and presto. my question is the ram stick are...
Summary: might be the ram, might not be the ram there is only one way to find that out is to run diagnostic program designed to test your ram its called memtes...
Summary: Hi all! RAM prob again people:) 1) Just installed K-byte 128mb 16x64-PC133 168 pin SDRAM( single sided) and my Sys start blinking at me(reboot galore...
Summary: Mobo=Intel SE440BX-2 Pentium II 400mhz 256mb pc100 Error 0232:Extended ram failed at offset:1B Research tells me that this error=bad ram?Although wind...
Summary: Hello everyone. I hate compaq's. See I just recently put a computer together full of older parts. I put 384mb RAM (1 x 256mb, 1 x 128mb) on my Compaq ...
Summary: hi guys, my pc configuration is Mercury motherboard intel 810 e chipset ,PIII 650 m,128 MB SDRAm.20gb HDD. until last week the pc was working perfect...
Summary: Hey, I have a major problem with RAM. I am putting together a computer from some old parts i found. I have everything but i miss RAM. The problem is t...
Summary: Hi My 3 RAM slot mobo is refusing to recognise the middle slot, which means that, out of a combination of 2 x 128mb and 1 x 256mb, I can't actually ge...
Summary: the current RAM i have is 128mb made by apacer... low low low memory and running duron :( sooooo i need to do something. the ram says pc133 on it and ...
Summary: hi guys, my pc configuration is Mercury motherboard intel 810 e chipset ,PIII 650 m,128 MB SDRAm.20gb HDD. until last week the pc was working per...
Summary: I've just installed two 128mb ram sticks into my pc, but when i boot up the computer is still reading my old amount of ram (128mb) as 64mb on both slo...
Summary: Long, detailed. Thanking everyone beforehand :D Okay. Assembled my system early this year, circa March. Ran fine until I got BSOD last week, something...
Summary: hi guys, my pc configuration is Mercury motherboard intel 810 e chipset ,PIII 650 m,128 MB SDRAm.20gb HDD. until last week the pc was working perfect...
Summary: Hello! Please bear with me, this will be a bit long! So, I have been working on a friend's old PC that was originally mine. It's an HP Pavilion 7370V...
Summary: If you didn't have 3D probs before the RAM was installed, I highly doubt it has anything to do with your video card. Check the motherboard manufacture...
Summary: HEY I'm building a new system, but i have to take what i bought on a plane.. will the security devices mess up my ram and mobo if i have no antistati...
Summary: Hey yeah. I just had a similar problem, what u might need to do like me as I added 256mb pc133 sdram. well I took it home and installed and it didnt r...
Summary: hi, i bought an asus a7n8x-e deluxe mobo. the cpu is and 3200+ and ram = pc 3200. i am having prob with the motheboard. 1. it takes a long time to de...
Summary: I hate to burst your bubble, but I am running an XP2400+ @ 2242MHz (11.5 x 195) on an Asus A7N8X Deluxe 2.0 with 2 x 256MB Corsair PC3200 XMS sticks a...
Summary: You say it's been rebooting "for a while now"...was there a time when your system was stable? If so, what have you done since then that may have cause...
Summary: Hey all today i bought 256mb of ddr 400 ram.now i rushed home and slotted it in.i put the pc on and quickly went into my bios and saw it stated 512 r...
Summary: I've learned that whenever installing new RAM, the very 1st thing to do is to test it using Memtest86. It saves a lot of headaches. The "CMOS error" c...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
