Summary: I m using Windows Vista Ultimate 64 Bit Edition. I m having probelm in RAM Frequency it's show at booting time 800 Mhz. Dual Channels But in Windows ...
Summary: Hey thanks for the quick reply and yes it does make sense. I have figured out with the board if you don't have a 800mhz processor installed then the ...
Summary: i have a ram frequency of 166 which it says in cpuz could some1 tell me how the ram frequency works, does it depend on wat cpu u have or is it just th...
Summary: OK, I looked at your original Topic thread. OtheHill said: "Post the exact brand and model of your computer or motherboard if custom built." Do that....
Summary: Hi, I'm running a home built computer that looks like this: CPU - AMD Athlon (x86 family 6 model 8 stepping authenticAMD 501 Mhz) RAM - Single stick 5...
Summary: Built a new system to put in my room a couple of weeks ago and while purchasing parts I was going to pick up an A7N8X, like I have in the computer Im ...
Summary: I don't think that's the problem (Windows) because it recognized the low density (16 chips) stick just fine. The Low/High density ram modules problem...
Summary: Hi I just installed 2 new RAM128MB sticks into my computer (clips secured). When I started the computer it just hangs at the original boot up screen (...
Summary: Did you check if the density is competable with the Ram frequency? My board hase a fsb of 400Mhz and can handle a max of 2gb Ram but not a 400 only lo...
Summary: I needed to add some RAM on my PIII 450 system so I got a used Kingston module from ebay. (More precisely, a 128 MB PC100 Dimm made by Kingston KTC661...
Summary: Greetings! Any assistance would be much appreciated. Please take a moment to review my situation. Hardware: -Antec Minuet microATX case w/ 220 PSU –...
Summary: I hope someone can help me with this. I previously had 1GB of DDR2 RAM (512 x 2 modules). I just upgraded to 4GB of DDR2 PC2-5300, which is the same t...
Summary: I have recently bought, on the advice of the retailers, MICRON ORIGINAL 256MB pc133 CAS3 SDRAM, as i wished to upgrade the RAM on my computer. I curr...
Summary: I recenly upgraded to having 1gb of ram.. yay!! anyway I've noticed that some app's seem to take a bit longer to start up... could it be that I have ...
Summary: It`s a brand new system that i just built myself...I was using the drivers that came on the installation CD with the AGP card so I don`t think it can ...
Summary: "I ran Memtest86 v3.2. I let it run for about 1hr 30min. No errors reported. " If memtest86 finds no memory errors after a couple of complete test pas...
Summary: Hi, I just bought a new ram 256mb 333 and tried to add it to my existing 256mb 266mhz. unfortunately I get the message that a system file of win xp i...
Summary: we have 3 computers at our office. 2 are using xp. the other 2000. all are using 256 mb blocks of advanced modules ram. all computers seem to have ran...
Summary: All my memorys are DDR. I bought my computer with a 256 mb. For the games work better i bought an 512 Kningsto.. Then there camed the hardware "eating...
Summary: This isnt as much a problem as an....oddity. When I go into BIOS it reads my RAM as 512 MB ok fine. When I go into device manager it tells me I have 5...
Summary: Hi, I'm having difficulties with a lot of crashes.My 256Mb/133mhz sdram seems to be messed up. I've tried to reinstall OS,install other OS's but it ke...
Summary: I've always left my BIOS to do all the setup work on my hardware automatically (its a phonex award bios). I was breezing through some of the advanced ...
Summary: 1) you put the good stick of 256MB of RAM back, and see if your stability issues vanish. 2) you verify that the RAM is compatible with your mobo/BIOS....
Summary: I have been having some serious problems with my Acer Aspire 5100 laptop. I got it in November and immediately removed the OEM and installed Windows X...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
