Summary: I am trying to Mirror (Raid 1) two 80gig Hard drives to protect my data. I started to us Danis506 driver, but notice a note at the top of the readme f...
Summary: There was an article on www.os2voice.org that got 2.1 on a machine. Check it out. Look for the "newsletter" link then search the archives. ...
Summary: Scott, just FYI, we have EXACTLY the same problem you have except this is on a Warp Connect machine. Would appreciate any info you find that works fo...
Summary: For a particular reason (don't ask) I need to reinstall OS/2 Warp 3 (update from 2.1) on a new machine (Swedish versions). The new machine is a Pentiu...
Summary: Hi all- This might sound crazy to some but I need to know if it's possible to run OS/2 2.1 on a P4 machine. I've got a mission critical application w...
Summary: I try to install OS/2 2.1 on a virtual pc and it does OS/2 2.1 disks 1 disks 1-5 correctly. It asks for the install disk and I capture it but it throw...
Summary: Beginning with all OS/2 Warp flavours this BIOS setting(>64MB) has absolutely no effect if you turn it on, its for OS/2 2.x. I think its just a loader...
Summary: Have some good stories about that too! I remember getting a game from a friend which neeeded 6 MB DPMI to run under DOS. I tried it on an old 386 DX/4...
Summary: You could install it from a fat hdd. Symptoms No CD-ROM device detected. Hardware Machines with an unsupported CD-ROM drive, for example a really new ...
Summary: Find this also: Symptoms No CD-ROM device detected. Hardware Machines with an unsupported CD-ROM drive, for example a really new or a very old one. Or...
Summary: Hi guys. I've managed to get warp connect installed and networked to my win98 pcs. Just one problem, I cannot access the Win98 shares, with a access d...
Summary: Hi guys. This may be useful. Symptoms No CD-ROM device detected. Hardware Machines with an unsupported CD-ROM drive, for example a really new or a ver...
Summary: Hi! I managed to get OS/2 Warp Connect 3 Bluespine installed on my Compaq Presario 425 (a 486DX2/66 w/16MB ram, 200mb HD). However, after installing T...
Summary: Hello Again!, Anyone read my post on 12/26/01 about my install problem with Warp on a Thinkpad 760c? Any insite would be helpful.It runs version 2.1 f...
Summary: I have installed Warp 3 with MS-DOS 6.22,Win 3.1 and Win NT 3.1 on a 486-33 without problems .The drive is small(240 Mo) and the 12 Mo RAM enough comp...
Summary: Is it at all possible to install OS/2 Warp 3 on a 1 or 2 GB HDD without using any BIOS translation? I had heard that OS/2 provides its own translatio...
Summary: I had the same problems when installing OS/2 Warp 4 under 6.1. There is a workaround that I discovered (I'm even putting together a step-by-step OS/2...
Summary: Hi, I'm trying to load OS/2 Warp 3.0 or 4.0 on a Intel P3 machine having 6.3 GB of IDE Harddisk. But it seems that it is not able to properly detect t...
Summary: Here is a problem which supposedly should have been fixed a long time ago. I tried to install OS/2 4.0 and NT 4.0 in dual boot on a Quantum LM 20.5GB....
Summary: I recently purchased a copy of Warp 4 for use in a proposal/prototyping effort. I am trying to install it on a variety of machines, and it is bombing...
Summary: To be perfectly honest my personal experience with v4 is all bad. v3/Connect is more stable and dear I say it so is Win95b. Random lockups duing useag...
Summary: Ok so here's my problem... I have 2 OS 2 install disks, a preview of OS/2 Warp and a full install of OS/2 2.1. I installed 2.1 on a P133 with 32 megs ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
