Summary: That's probably correct. If the controller does not have 48 bit LBA compatibility, that will be the case. Check http://www.48bitlba.com/ for more info...
Summary: Are you using an 80-conductor cable for the 120GB drive? By mistake I used a 40-conductor cable on the PCI IDE card. My system would not boot either. ...
Summary: Sorry, did you want to know if IDE cards which give you the ability to plug more drives into the case come with DVD decoders. If so, no. You can buy ...
Summary: Help, I have fitted a ultra ata 100/133 pci ide controller card to give me another ide channel so that I can have a zip drive, all seemed to go well, ...
Summary: I use an IDE PCI controller card and it works fine.I would think a SATA controller would work equally well.In case of a system reinstall drives on a P...
Summary: hi I connected a new pci sound card and disabled one that is integrated on my 845p4 motherboard (av97).Then all windows 98se,xp,2000 restart after try...
Summary: Hello, I'm trying to install a PCI video card on my HP. I bought an ATI Rage 128 Pro 32mbSDRAM 64 bit card. I followed the HP guide to installing a ...
Summary: hi I connected a new pci sound card and disabled one that is integrated on my 845p4 motherboard (av97).Then all windows 98se,xp,2000 restart after try...
Summary: I am running a HP 8754C PIII 800mhz 384MB ram..I am having major lockup's from a OPTI 82C861 Pci to USB card..I checked the www.opti.com for any drive...
Summary: I have a AMD 64 2800 with 1 GB RAM running Windows XP SP2. All the 2 IDE channels (both master/slave) on the MB are connected to HDs. I have tried a...
Summary: hi i went to install 1 and it gave me a message tellin me i need card cage for pci express cards over 75 watts...now in my dell manual it does say tha...
Summary: Im trying to install a Verto Geforce4 MX 440-SE 64mb SDRAM PCI video card for my HP Pavilion 511w modle. I have done everything windows told me to do(...
Summary: I recently installed a new 200GB HD in my system. My system already had a 60 GB and 10 GB IDEs and a 200 GB SATA drives. When I installed this drive...
Summary: I am running a HP 8754C PIII 800mhz 384MB ram..I am having major lockup's from a OPTI 82C861 Pci to USB card..I checked the www.opti.com for any drive...
Summary: I have two Yamaha CD3200E CDRW drives on Promise Ultra PCI IDE card, one per channel, both masters. I also have a regular CDROM drive on an onboard ID...
Summary: Morris; 1) almost no advantages. Only if you want to create a single, very large partition (raid 0, see my notes below) or if you are seriously conce...
Summary: Hi, I just got a new nVIDIA GeForce FX 5200 (PCI, made by PNY) with 128mb of vram. For a while it worked fine, (it still dose) but now when ever I tu...
Summary: My computer is a HP 8754C PIII 800Mhz 384MB WinXP Pro. My XP is currently updated and so is everything that is attached to the computer. I have a PCI-...
Summary: Dunno why, but since a few weeks, while no change has been made to my pc hardware, I began to have this annoying pblm: I have several hard disks on ...
Summary: How I fixed a similar problem. I have a NetMos MP9715 dual parallel card (bought about 6 months ago) which worked just fine on NT 4.0 SP 6. I just up...
Summary: I just acquired a new mobo, processor, and memory and would like to move my WinXP drive from a Promise Ultra66 PCI IDE card to the onboard secondary m...
Summary: I have been looking around the net for a new pci graphics card and I have read that the best chipset for pci, is a geforce 5700le, but I also read tha...
Summary: Hi friends, Just a basic question on driver installation / updation. What is the difference between: a) Installing a driver by right clicking its .inf...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
