Summary: I am running win2k on my 20gig with a 2.5 partition which i planned to install win98se on. The win2k partition is NTFS and the 2nd partition is FAT32....
Summary: I just installed Windows 2000 Professional on a blank, new HD. However, setup refused to create anything else than one big 60 GB partition of the enti...
Summary: Presumably there is 'no virus util' running in the bios? Also perhaps you could dis-able any installed A/V software that may come in at boot-up; maybe...
Summary: Hello: I have been running a dual HDD setup on a Win2K PRO system.During the transition with an RMA of one of the damaged harddrives, I decided t...
Summary: WARNING!: This is a long story and i hope i made it clear for everyone. If not please ask for clarification. thanx and i hope you can help. i have 2 h...
Summary: after loads of google and computing.net! copy userinit.exe from winnt drive or CD to \winnt\system32 on the drive letter that used to be the w2k root....
Summary: I was having some issues with one of my hard drives, and I could not boot into windows, so I used partition magic from a DOS prompt to compress my har...
Summary: I used partition magic to part my HD. Ater reboot, go message "Missing Operating System". Then I use the back up disk to merge them. Even worse, now I...
Summary: Hi, for my first post, let me relate a familiar scenario..... P111 650, just move an Adaptec 2940UW SCSI and IBM high speed SCSI drive from another...
Summary: Hello: For the past week I have been busy manipulating three hard disk drive layouts in the BIOS and deleting and creating twelve partitions. Running ...
Summary: OK, broke down and installed WIN2000 on one of my computers. BH6 PII @ 350 ATI All in Wonder 129 AGP PromiseULTRA100 "scsi" IDE card SMC 121110/100 ne...
Summary: Hello. I have previously used Windows XP Professional. Due to recent events [and XP blowing my hard drive up], I have switched to using 2000 Pro aga...
Summary: I have used Partition Magic to change the size of my partitions, but after this I have a "drive" that is unallocated, instead of one big "drive". What...
Summary: Hi, Windows 2000 uses the boot.ini file (in root of C: partition) which contains this line: default=multi(0)disk(0)rdisk(0)partition(2)\WINNT that me...
Summary: When trying to fix my gf's computer we used Partition Magic to change the letter on drive D: to C: and now win2000 won't boot. We just get a blue scre...
Summary: Hello Erin, It sounds like what you have is a CDRW designated as drive D and that that is what the shortcut in the "SendTo" folder is referring. The Z...
Summary: i have 3 partitions on my hard drive. on my c drive i have win 2k pro and all my programs (ie. 3ds max, lightwave 7, after effects, premiere, ect.) wh...
Summary: Hello I am using partition magic 6.0 win windows 2000 professional. Every time I create a primary partition it will assign it a drive letter it shoul...
Summary: I have a 256 mg mmc card that went bad- lost its DOS partition. (I think I caused it by removing it from my PDA while it was activated) I managed to ...
Summary: I saw several posts regarding WinME and Pro 2000 dual boots, and that's really what I need to do. My machine shipped with WinME and I need Pro 2000. I...
Summary: Install new drive as Slave to current Master (connect on same ribbon cable etc.); remember to change jumper on current drive from single 'Master' to '...
Summary: I've been using Partition Magic 6 totry and convert my hard drive from NTFS to FAT 32 when i try this i get an error message saying either my hard dis...
Summary: I bought a 3.5" USB 2.0 Enclosure, then an IDE Hard Drive. I put the hard drive in the case and plug it in my WinXP. I used Partition Magic to parti...
Summary: I'm trying to set up a dual boot configuration between Windows 2000 and Linux, where Windows 2000 is already installed and taking up a large part of t...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
