Summary: Hi I recently got a 2.6ghz processor to replace my 1..6 processor (penium 4). for some reason the bios shows that this is only operating at 1.3ghz. ...
Summary: The GHz = preformance ratio is really a thing of the past, but to the avg consumor this can get confusing, because it was not until recently that proc...
Summary: Hey Jam, You are really helpful. Thanks so much. I am sorry, but I always get greatly confused when ever I am presented with such situations. I dont k...
Summary: I have an older Gateway, with a Pentium III, 500 megahertz processor. Right now I have 468mg of Ram. I've been thinking about upgrading the motherbo...
Summary: Yeah but it still can get confusing to the avg pc person, unlike Intels where they list a J or a D, or a 6xx so you know that is newer then the old on...
Summary: I know, I know, another Athlon XP! I contacted EPOX to find out what my chip could be upgraded to. Hard to get many answers from them. I had an AMD ...
Summary: Easy there guys. Mike has a valid question and concern. Some computer "wannabe experts" tend to give advice that system will run faster if you have ...
Summary: Hi everybody. As a novice can anybody assist. I foolishly damaged the pins on the CPU which I had in the PC, while cleaning the fan so I bought a new...
Summary: I just bought a new processor -- an AMD Athlon XP 2800+ (~2.09 Ghz) with a 333 FSB. In my bios there are 4 options to choose from for my FSB frequenc...
Summary: I insatlled an AMD K6-233 in a Presario 9548 and jumpered it as follows with the indicated results: 1) at 66MHz Bus speed with a 1.5 multiplier it did...
Summary: I am planning to upgrade my Dell Dimension B110's Processor to a Pentium Processor. This is the Celeron Processor (This Came with my Dell): Number of ...
Summary: heres some simple math to make ure "problem" become a misunderstanding 100MHz + 100MHz = 200MHz FSB 133MHz + 133MHz = 266MHz FSB that is how the AMD c...
Summary: Thanks so much for the replies guy's. Thing is, it looks as if my ratio is locked... I have a "CPU/DRAM" option I can toggle, from like 100/100 to lik...
Summary: I am updating my Mobo and processor. The board is a gigabyte mfg brand, the processor included on the board is a Intel Celeron 1.2Ghz, does anyone kno...
Summary: I have some technical questions for everyone. I have a Dell Dimension 4300 with a P4 1.5G 478 Pin Processor. I was messing around with my system and r...
Summary: I just wondered if anyone could help me with this compatibility issue. I have an Abit KT7-RAID motherboard, and in the manual (which I'm afraid I've m...
Summary: The processor clock speed has nothing to do with whatever programs you have running. It is a hardware limitation issue. That said it is possible that ...
Summary: I am heard a couple different opinions on this.. Right out of the box, should a person, say let the processor run a few days then run a few benchmar...
Summary: I have just ordered a processor upgrade from the Upgrade Store. I am concerned that after the plug and playish processor is installed and configured ...
Summary: Sorry I screwed up my previous posts. I’m sure they were confusing. Newer HDDs (ATA 100 or higher) require a 40 pin 80-wire cable to connect to the I...
Summary: Does anyone have any input on the reliability and speed increase of the PowerLeap PL-iP3/T adapter for the Slot1 processor on my motherboard. I have a...
Summary: i was wanting to know if a amd processor wud be better i belive the machine will take a 200 mhz processor will the amd out perform cyrix processor ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
