Summary: Hi, I tried every settings that you suggested. I also tried running the FSB at a higher speed i.e removed the jumper for bus speed and still the same ...
Summary: You dont think it recognized?..or you know for sure it didnt recognize the RAM? Check your system properties to find out how much RAM is showing.(>Con...
Summary: Hi, i have a Pentium 4 Northwood 2.8Ghz hyperthreading, 800MHz FSB with 2x 256Mb PC3200 DDR Ram Modules(Dual Channel). I just purchased 2x 512Mb PC320...
Summary: RAM is brand new 256MB DDR333 Samsung CPU is NOT overclocked, it's running at 1.6 I have a 300 watt power supply. Other people have had problems with ...
Summary: The amount of ram. Win 98/98SE works as well as it can with 128 mb or more - in testing I did any less than 96mb will not allow the hard drive to achi...
Summary: Hello, I just bought a new motherboard and CPU and tried install Window XP. Anyway, it seems to have a serious problem. Here is the spec of my system...
Summary: I'm looking at a friend's computer for him which has a celeron 2GHz processor (runs at 400 MHz, right?!) and 512MB of RAM. I've just re-installed xp b...
Summary: Hello! I am having a problem with a 486 PC that I bought at the thrift store for $6.88... I want to put two HDD's on the machine...but I can't!! when ...
Summary: The UT NF4 SLI-D is definitely an enthusiasts board. Do you have any intentions to overclock? If so, the Winchester was a poor choice. You would have ...
Summary: I just bought a stick of 512 pc2100 RAM but when I put it in my computer, it beeps as if there isn't any ram in it at all and nothing shows up on the ...
Summary: Ok, I'm having a small problem. Just upgraded my machine, and having all kinds of fun. The old system: AMD XP 2000+, 1Gb PC2100 RAM, with a K7S5A ...
Summary: Hi, I recently purchased a new system containing the following specs: AMD 3700+ San Diego Asus A8N-SLI 2 Gig of Kingston pc3200 (4x512) Leadtek 7800gt...
Summary: well i just built a new system and i pulled parts from my old system into my new one, and since ive started using this new system ive been getting alo...
Summary: Hi Andrew It is true most ram modules will drop down and operate at lower clock speeds than specified. How ever, to save yourself possible conflict is...
Summary: The TI4200 is a good card but maybe a bit slow for your system. The other problem is that the TI4200 128MB is slightly slower than the 64MB version be...
Summary: (1) You also might want to make sure that the new RAM is compatible with the GA-8I945G. (2) Your FSB is 200 MhZ. If you run the RAM at 667 MhZ, that's...
Summary: ""Driver IRQ Not less than or Equal"" "I have ran MemTest86 and it came up with 26 errors on my first module of RAM." Having actual BAD ram is rare. B...
Summary: hi i have a serious problem playing older games. Anything older than Quake 3. Also on Starcraft now little bit of the screen about 5 cm down and 1 cm ...
Summary: "motherboard= p4m266-8235" That's the model number(s) for the VIA chipsets used on the motherboard, not the board's model number. P4M266 (aka VT8751) ...
Summary: I have a problem with a new comp. I just upgraded with AOpen n250a-fr mb. Athlon 64 2800+ and Powercolor All-In-Wonder Radeon 9800 Pro. My problem i...
Summary: Could be a short somewhere inside the laptop. Try replacing the ram inside it. or getting a new hard-drive, or some other removable hardware. More tha...
Summary: The continuous beeping usually refers to a RAM problem. You could try reseating the RAM. Not booting the first time indicates a problem with power sup...
Summary: If you have your BIOS set to auto detect the RAM speed, it will take the lowest rated of the RAM sticks (in your case, PC100), & run them ALL at 100mh...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
