Summary: Ok, I've been running my cpu at a FSB of 220MHz for a while now. It's rock stable. But I've never been able to reach 225MHz at a stable state (I can r...
Summary: I am a little confused and would much appreciate help: According to the CPU Z programme, my PCs Bus Speed (or System Bus Clock??) is running at 333.9M...
Summary: Hi to all. I have a problem trying to overclock my Athlon XP 1800+ T-Bred, 256MB DDR 266MHZ, Asus A7v266-c. As far as I know, with this mobo I can't ...
Summary: Hello, During a recent lan party I was found to having the slowest desktop there, that was at least working...;) Anyways, my system specs are as follo...
Summary: I have a pentium 2.4 CPU running with an FSB of 533. I also have DDR400 ram (1024MB, in 2x512MB DIMMS). I bought the RAM and started having problems...
Summary: I am stuck at a fsb of 180 on an amd 2600 mobile cpu. I achieved this setting by 5mhz increments with a 9X multi and a vcore of 1.625. My problem is w...
Summary: Thanks indigian! I now got my socket939 3000+ winchester to 2700MHz on a Asus A8N-SLI Deluxe. About the socket754 newcastle I have absolutely no idea ...
Summary: The P4 processors use a quad pumped front side bus. I'm not an expert, but basically a 100 MHZ front side bus gives an internal FSB of 400 MHZ, and a ...
Summary: I think you were right sabertooth. I changed my jumpers to 200fsb to set the pci clock to default, system perfect, now I can squeeze a fsb of 215 befo...
Summary: I just bought an Epox-8K9A2+ and an XP3000+ (2.1ghz). But i cannot get the system to run 166 mhz FSB because then i am not able to get very far in st...
Summary: Whoops, forgot a question. I Overclocked my FSB to 150 MHz in my Gigabyte 7ZXE BIOS. Everything runs stable and I have no overheating problems, but ev...
Summary: Hi. I have an AMD Athlon 1700+ running at 1100mhz right now. It seems that every time I put the FSB at 110mhz or more my computer gets extremely uns...
Summary: Install SpeedFan, Motherboard Monitor 5 (MBM5) or any other tool to check the cpu temperature in windows. Run 3DMark 03 (or any other benchmark pr...
Summary: I probably did say something like that; and more than once. johnoh, jam, real_cool, Kevn, Janos, You, and others too numerous to mention here have o...
Summary: The problem can be related to the PCI clock speed. At 100Mhz. the PCI clock speed is taken as 1/3 of the FSB speed, so you have 33Mhz. at 1100 you hav...
Summary: I'm confused about the description of the mobo, because how can it advertise having a 133 and 266 FSB? It doesn't make any sense. --- the mobo support...
Summary: My fsb is recongnized as 66 mhz in windows. My system: XP 2000+ 512 MB PC 2100 DDR ECS K7S5A GeForce 4 Ti4200 350W PSU Maxtor 60 GB 7200 ATA 133 (boar...
Summary: Hi there, Jam The bottom line, if you're NOT an overclocker who tweaks anything and everything all of the time anyway, is simply to do as little as po...
Summary: Hello all, I have a Trigem Cognac+ mobo and after doing some research, the max CPU the mobo can take is a PIII 1100Mhz/256L2/100FSB. The FSB of my mo...
Summary: My 2000+xp t-bred goes up to 152mhz fsb with out problems.when i take further it crashes badly.i think it's from my mobo and ram.i tried to set the ju...
Summary: Hi, Today i found out the max HTT/FSB of my Asus A8N32-SLI Deluxe is 334MHz.. My RAM has a limit of 255MHz, and my CPU has no limit yet.. So now i ne...
Summary: I just bought a new motherboard which came with a P4 2.0A Processor. Right now the CPU Temperature is either 31 or 47 C. (Heat Sink temp is 29.0C, an...
Summary: this might sound like a stupid question, but is the multiplier unlocked on your cpu? cos i had the same problem where i could not get my xp2400 over ...
Summary: Hi everyone!!! I just brought a new Athlon 1600+ to go with a new Abit KR7A-133 motherboard, with 256M of DDR RAM. My new video card is a GF4 4200. Th...
Summary: Well, maybe I should rephrase some of what I had written earlier. First though, you're right, DDR memory is not supported - which is actually fine wi...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
