Summary: When the firewall is launched on boot stage 1 or 3 fails - meaning the other 2 also fail. However the same commands (extracked from the startup log) e...
Summary: Hi 3Dave, Tks for your advice. I have been working on GNOME eversince from lasting posting. So far not much problem found except in one occas...
Summary: I am having a problem getting the kde to load up automatically on boot up after I installed suse 8.0 professional. It goes straight to command line an...
Summary: Just installed RedHat on a box and for some reason eth0 (and lo for that matter) does not come up on boot. I have to type ifup eth0 to get it going. ...
Summary: Hi, I have a linux system (Suse 8.1) and have managed to get samba set up to access my Windows Share. I have edited the fstab file and entered all...
Summary: Hi, I've done a few searches on this and read at least 30 posts from this site and others, but it all goes a bit over my head. I've just completed my ...
Summary: can i know what mouse was detected on boot? this is to be part of one script to load/change X mouse settings depending if its ps/2 or imps/2 or USB ...
Summary: So I thought I'd be smart and put /usr and /var on a raid partition. Big mistake, at least once I turned the machine off (after a 27 day uptime...) I ...
Summary: I am using laptop computer with a wireless card. At boot, linux waits for my wireless card to get an IP from a DHCP server, which most of the time ...
Summary: Hello, I have problem on squidguard , I set it to deny access to site , but now when I want to use it, it deny all ADDRESS for me , who can help me ...
Summary: Hi there, im just new in linux. I would like to start my linux in GUI, but it says problem on display. My vga card is nVidia Quadro NVS 280 but it's n...
Summary: Ok just switched to fedora core 3 and was going well until i installed the linuxant driverloader and my netgear wg311v2 drivers. The installation fai...
Summary: Hi, I just installed Suse linux 8.0 and it freezes on boot when it says: hardware scan on boot or something like that. The installation went fine. W...
Summary: sys_mount() returns ENXIO on boot, giving the on screen message - VFS: Cannot open root device “hda2”. The kernel was made from Linux 2.6.17 sourc...
Summary: Hi folks, FC5_64 I encountered problem on burning DVD+RW media tested: TDK DVD+RW 1-4x brand new Verbatim DVD+RW 1-4x brand new packages newly install...
Summary: Hi, I'm using RedHat 7.0 with a single 3com509 NIC in an old 100MHz Pentium box. On boot, the NIC won't be recognized. Once I use modprobe (modprobe...
Summary: Hi people, I am really hoping to get back into using a linux distro on my laptop now I have a new one but am having problems getting things to run cor...
Summary: You should try to fdisk/mbr on hda1 then you can either try and configure etc/lilo.conf and then run lilo, or reinstall lilo. I had the same problem ...
Summary: Hiii, someone helpp me sooonnnn PLZ i've installed FC2 on my 2nd hdd. 1st hdd has xp pro. both hdds are 20 gig. after installing fc2, when i try to bo...
Summary: I have my Red Hat iso image downloaded from ftp.redhat.com. After I boot with the first installation CD, the process goes very well, but when goes to ...
Summary: Hi all folks, I encountered following problem during booting RH8.0 Grub ==== At start after selecting the kernel ........ /: contain a file system wit...
Summary: I had a smilar problem on one of my computers. It can't recognize HD's larger then 30 gigs and I tried to install a 40 gig drive. Anyways I installed ...
Summary: Sounds like a faulty network card. Does this card work ok on another machine or in windows? Also try another Network card. Is Linux configured to DHCP...
Summary: thank for information but I install grub on" /boot" hd(0,1) I wonder how grub see hde1 is? it's say hd(1,0) maybe here is problem? Anyone known?? tha...
Summary: Well, there are 2 places where your screen talks about swap while booting you system: Activating....[OK] ..hostname....[OK] and later: Enabling swap.[...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
