Summary: I am having a little difficulty install my NIC in my computer. I am running Windows NT 4.0 workstation service pack 6. I am trying to install a 3Com...
Summary: Hi, i have a problem with 2 exact 3com nics, (3c509b ISA), both pnp disabled with etherdisk utility, with I/O 300 - 310 and IRQ 10 - 11. I configure w...
Summary: Make sure you have the right drivers for your 3com NIC. What you have to do is once you have the card in your which ever slot in your machine and you ...
Summary: Hi, I'm having problems installing my modem (Topline EVQ1433V (Dynalink, Rockwell chipset)) in WinNT 4.0 workstation. When I try to add the RAS Servic...
Summary: I have some problems installing two modems under WinNT 4.0. I only succeeded by using two ISA-type modem cards. But any other combination like PCI-ISA...
Summary: Hi, I have a problem installing my Roland MPU-401 midi card. There is also a sound card in my system. IRQ and I/O are different. Reserved IRQ in BIOS....
Summary: As long as you have the resources available on your computer (ie. IRQ's, DMA's, etc) then you should have no problem installing the NIC. My server has...
Summary: Hi. I have just installed NT4 Enterprise editon at a compaq Prosignia (don't know which type) Its a P1 120Mhz with 65Mb EDO ECC ram. In the beginning ...
Summary: Hi all, I've been looking for the driver for my 3COM network card and finally got it but after the installation it seems to me there are still some pr...
Summary: Does anyone know if there should be any problems installing NT-server on a computer with netcard: 3Com® EtherLink® 100 PCI Fiber Network Interface Car...
Summary: I have a machine which I've ghosted from an image and now need to install the NIC driver (don't ask me why it was never included in the ghost image - ...
Summary: We have an Windows NT 4.0 network here where I work. On three computers, I am having problems sharing things. Each computer has Windows 98 on them. I ...
Summary: Hi!!! I need your help, because I have problems installing the driver of a 3com ethernet card. The erros said:"Problems with 3com 3c90x adapter drive...
Summary: I have a new ASUS TUSI-M with onboard nic (SiS), I have tried installing networking during and after the NT install and same problems abound, installi...
Summary: Here's the situation. Our company for some time had been assigning static IP's to W98 workstations. As our company grew, maintaining this information ...
Summary: I have had this happen also, power down the machine and pull the NIC out and see if it will boot. This should work but you will see several errors. ...
Summary: I have run into this several times, most recently with two 3COM NICs. I am unable to have NT 4.0 Workstation identify the NICs as independent. There...
Summary: I had the same problem when installing 2 nic cards. I was using Aopen cards but had to change both of them because NT does not like Aopen. Ended up ...
Summary: I just installed a 3Com "3C509B-Combo" NIC in my Windows NT 4.0 workstation service pack 6 box. I have not run any cable to it. I am curious though ...
Summary: OK Nic 1 is connected to a corporate router that we do not have access to. This Nic controlls internet access and other network applications in our bu...
Summary: Dos 6.22 machines. Etherlink III NIC cards. Had problem while installing Dos Clients. Errors being, 1. Insufficient memory. (happened sometimes) 2. C...
Summary: I have a problem installing WIndows NT v4.0 sp1 on a... AMD Athlon XP 1700 ASUS A7V266-E 512MC Ram Audigy SND no serial/LPT/USB Dlink 538TX+ NIC ATI R...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
