Summary: Ok...Buddy asked me to network printer with 3 computers. The main PC has windows XP home...and the other two I beilieve are 98. What is the easyiest ...
Summary: Plz Help... I am running 3 NT workstations connected to a network hub with also links a HP 4050TN printer. Recently, when printing, the printer would ...
Summary: You will need to either fit a network card in your printer, or aquire a print server such as the D-Link printserver. Plug your printer into the server...
Summary: Hello My mom runs Windows XP Home and i am running on Mandrake 8.2 and the printer is on her computer can someone tell me how to network it and if it...
Summary: Need help to network my printer; I have three Computers #1 is Dell with WinXP, #2 has Win 98, and #3 is Sony Vio Laptop with winXP. My Canon printer i...
Summary: hey, im kinda new to networking, and i was wondering if there was anyway my smc7004vbr router could share files and a printer btw my 2 comps my pIII i...
Summary: Two basic ways to use a shared printer. One is to share it on xp and let another MS OS get the drivers when you ask it to use the shared printer. The ...
Summary: My husband's Dell laptop runing XP Pro has been part of a home network we have had for about a year. He had no problem before printing wirelessly to o...
Summary: Hi, I have a lexmark X75 trio printer connected to my server XP Pro. I enabled sharing on the printer. I attempted to install additional drivers on my...
Summary: i have manage to connect to my priner which is a brothers dcp-340cw but i can only connect to printer or the netnot both at same time is that right an...
Summary: Networking a printer. When there is a printer that is connected to a computer by Parallel cable any user that logs on to that computer will automatica...
Summary: I am using Internet Connection Sharing and my Win2k machine and my Windows98 machine has internet access but cannot see anything on the network (print...
Summary: If I get it right, your roommates router(connected to a university network port) hosts a computer and a printer. Your computer , attached to another r...
Summary: Hiya there, I had wireless networking set up, then we had a loft conversion. The laptop could not pick up the signal. so i installed the net...
Summary: A few months ago I added a networkable printer (Lexmark T520) to my home network. I was using a workgroup network, and although I had some minor annoy...
Summary: Hello People, I have a HP4050tn printer networked to 4 workstations. recently I ran jetadmin software from HP, and the safe test page states that I ha...
Summary: Personally, I would use VLAN's for this and VLAN capable routers and switches. This is great for segmenting portions of the network from each other. ...
Summary: On a P2P (Host to client via 8-port switch), the printer installed on the host is unable to be seen by clients after re-boot. They always have to unin...
Summary: My router has an apple OSX and winxp. On one USB port of my win machine I have a HP PSC 1310, printer, scannere, copier, and want to know a suitable...
Summary: On his machine, Control Panel>Network>File and Printer Sharing>I want to share my printer. On your machine, Control Panel>Printers>Add a printer>Netwo...
Summary: good day to all. how could i setup a printer server in the office. almost all computers are connected through lan. but the units are eihter 486, penti...
Summary: I have 1) mac 1) ME, 2 win 2000 worstation, hp printer and 5 port hub connecting to cable modem with dynamic ip. my question is 1) I want all the pc a...
Summary: I would suggest you setup dhcp. Only use static addresses for servers/switches/printers/network equipment. But in your case you may wish to consider ...
Summary: I have the same problem in a earlier post. It's a lexmark on a win 98, networked with an xp. It's hooked up via USB. I have another printer networke...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
