Summary: Have you tried LPR printer without local print spooler. I remember, there was a problem in a library of Windows XP, that results in printing problems....
Summary: I have a printer all-in-one (Canon MPC 400) and I have not a DOS driver for that (I use FoxPro 2.6 for DOS). Is there software that will print FOXBASE...
Summary: I have been having a problem printing from dos programs and the dos command line. I would get errors and a window popped up and said mgavrte.exe caus...
Summary: I just purchased a HP photosmart 7350 printer which is connected to a usb port. My PFS First choice program cannot find a printer on a usb port when I...
Summary: Hi, I use windows XP along with an HP 3820 Inkjet Printer. But I want use a dot matrix printer (Epson lx 800) for cheap, bulk printing. Problem is th...
Summary: Hi, Can someone help me on this one, I had an Epson LQ-570+ its been functioning under my DOS 6.22, but when I format the CPU it suddenly stops printi...
Summary: I cant seem to get a computer to print to a local printer. the cable has been tested and is ok. Are there any special settings that need to be in th...
Summary: I create alot of print files from a Windows program that my printer driver. I have WinNT 4.0 installed and open the DOS Window to print the files usi...
Summary: You will have a problem getting on the internet in DOS, but there is no PRINT problem. Use the print command in DOS, and when you get a DOS word...
Summary: Wordperfect 5.1 works in Windows ME. I was worried at first because it would not run when I was installing it with DOS 6.2 for "not enough file ...
Summary: I have ran into a problem with DOS, WIN98SE, and TCP/IP print servers. The problem begins with the DOS based program. The WIN98SE machines must be boo...
Summary: I have a HP DeskJet 710C and uses Windows 98. When I print out from Windows, new lines are added to the file c:\windows\hpfdjc13.ini, such as [PCLEMUL...
Summary: I did notice that this forum is alive and would like someone to help me with my problem. I cannot print from dos based program on either laserjet1100 ...
Summary: I had a similar problem. Do you specifically require an output to file (.prn file) or are you trying to find a way to print from a DOS app on a Window...
Summary: I have just purchased Canon USB printer S200SP. it works fine in windows, however, when i'm trying to run DOS program and print from DOS - it shows e...
Summary: Hi All, I'm working on Windows NT 4.0 and have downloaded the simplified chinese character set (GB2312) onto my machine. I've a .txt file that contai...
Summary: I got a problem whenever I tried to print to my printer(Canon BJC-255SP). It will give me a message 'error printing to port LPT1.Please make sure your...
Summary: Im having some problems getting a printer to lay everything out on the page properly in dos. My software and hardware are no longer supported so im i...
Summary: I run a DOS program as a windows application. The program runs fine in all versions of Windows but will only print to a Laserjet or epson characterse...
Summary: I do having a same problem on printing on dos. I try exit in MSdos and type "dir > lpt1". It still nothing coming out from printer. Windows setting e...
Summary: I have the same exact problem happening on my home network. DOS Emulation Print Job, 345 pgs, two lines of spiffy hieroglyphics per page. Will consul...
Summary: Hi, I hope someone can help me. There is an old DOS software that is supposed to print some electrical drawings or what. The problem is that this prog...
Summary: To: Svend Broholm since you knew about prn2file I Thought you might help me with a much more complex problem. I need to develop a driver to use in my ...
Summary: Os=MS DOS 6.22, Using COMM 1, Epson RS-232 Serial printer w/ 1 k buffer I am using a serial printer with a 1k buffer. When I send print jobs I get ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
