Summary: sanas, The short answer is that a single device queue exists on only a single device. Speaking more completely, the way to achieve what you are trying...
Summary: Is it possible to create a print queue that prints directly to a text file? Seems dumb since I'm printing it from a file already. But I'm trying to se...
Summary: Hi how to stop print queue and delete all pending job using 1 command?..previously i'm using this step "stop\reset\que hsiplb04"..but when i'm show qu...
Summary: Is it possible to re-direct the output of a print queue to be saved in a file instead of being printed on the printer? If so, how can I do this? ...
Summary: Trying to get a summary report of pages printed by a specific print queue - however using accounting/summary/report=(pages,records) Returns print job...
Summary: Running UCX 4.2 - ECO 1 SYS$PRINT is the default print queue and prints to an HP Jetdirect IP 10.1.1.8 (currently idle). I did INITIALIZE /QUEUE MLSY...
Summary: I have a user who, while VPN into our network and telnet'd to a VMS host, wishes to submit a VMS print job to a VMS print queue and have it printout o...
Summary: What should a BATCH queue do with a PRINT job ? If Your question is how to move a job from one print-queue to another, then the answer is simply: SET...
Summary: I have created a print queue but what ever I do, it always prints a trailer page. Below is the init command that I've used. I have created numerous ot...
Summary: We are needing to move a Kyocera laser printer taht is hooked to our VMS 5.5-2 system through a serial connection. The print queue is called lta100 f...
Summary: SYS$BATCH is a queue and should show up with the command : $ SHOW QUEUE SYS$BATCH Something like this will be displayed : Batch queue SYS$BATCH, idl...
Summary: If you're talking about Printer queue and you already running TCPIP or UCX try the following Command: INIT /QUE /PROC=TCPIP$TELNETSYM /ON="10.0.0.10:3...
Summary: We use dcps an have our queues set to use a postscript overlay form. Recently one printer, a DEC LNC02 died and we needed to install a NETPRINTPOCKET...
Summary: Thanks for your help. Sorry, my explanation of the problem was a bit short. I'll try it again: An automated test system creates a data file while a te...
Summary: I am trying to print normal txt file through a VAX C prog using SYS$SNDJBCW system service. I have TCPIP print que set on the node. The job gets print...
Summary: Hello! In this forum I already found some information on printing, however it didn't worked on my system. This is what I've done so far: $ start/que/m...
Summary: Thank you Joseph I tried the above and then use sh que/all DCL command to show the status. I got Following reply $ sh que/all Printer queue QUE, stopp...
Summary: HP book "PCL 5 Printer Language Technical Reference Manual" part number 5961-0509 you have to call customer direct to order unable to order outside of...
Summary: Hi, My old PS printer has gone and now all I could got was a PCL printer. Please, tell me how could I set a queue to this printer. I don't know which ...
Summary: Hi, How can I setup a LPD printqueu so that foreign system in other subnet's can print. I don't want them to print directly to the printers' ip-addres...
Summary: I have some PCs connected to a VMS7.1 server. When smbdy init a print job, everyone else get an echoe on their active terminal window... The quest...
Summary: my printer sometimes gives error ..and it does not print the document...it says....'problem communicating with the printer'...I have checked all my co...
Summary: Hello, I would like to associated a print screen function to one of the F keys (F18, F19, F20 ...). The workstation is a VAX 4000-60 working with Ope...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
