Summary: I have a scanner that has a parallel output, and my new computer doesn't have a parallel port to attach it to. This old scanner works really well and ...
Summary: I have an older parallel printer that I intend to connect to my newly finished PC. It will go from the new PC USB port to the parallel cable or connec...
Summary: My computer is only able to connect for DSL via a USB Port, hence, I have an adapter attached which the cat5 plugs into and the other end plugs into m...
Summary: hi, I got an offer to buy a yamaha crw8824 cd-burner. Can i connect this drive with its scsi-connector to the usb port of my desktop. Apreciate your a...
Summary: Elements permanently connected to my computer with USB: 1.- laser print 2.-Injection print 3.- Mouse 4.- Scanner Elements temporaly connected to my co...
Summary: HI go into bios setup and be sure USB is enabled. you could try a over the top reinstall, may work. or turn off onboard USB and buy a USB 2 card.. as ...
Summary: I have a scanmagic 1200dpi scanner. My pc was disconnected from power supply accidently, therefore I had to re-install scanner. I uninstalled softwar...
Summary: I have a HP LJ1010 (USB) installed on Computer A in a Windows NT network. It has been configured to act as a shared printer. I want Computer B to be a...
Summary: "the mouse has to be a combination mouse capable of running through USB." As in, it has to have the circuits for both a PS/2 and a USB connection buil...
Summary: I have a Fujifilm AS-1 Scanner connected to my laptop using a Parallel to USB cable. The problem I have is that the Twain driver I have installed is l...
Summary: By the way - 1284-A is the 25 pin D-sub connector. http://www.interfacebus.com/Design_... - these USB to parallel printer adapters are meant to be c...
Summary: You can buy a cable to connect your USB printer to your parallel port on your computer. Go to this link to find what you need: http://www.usbgear.com/...
Summary: Is there a program that would allow me to create a virtual usb port or a virtual parallel port? I have a PSION handheld that connects through COM port...
Summary: My chip sits on DIP connector in the board with parallel port. I am connecting my usb to parallel converter to that port. what do you mean by connect ...
Summary: Ok, here is a doozy for you guys. I have a visioneer 9020 USB 2.0 scanner hooked directly into my computer motherboard usb 2.0 port (asus a78nx deluxe...
Summary: First let me thank the people that helped me add the hard drive and recover all my files. Now I have a scanner with no external power supply. It runs...
Summary: My problem is this one: I have two USB ports and for some reason they don’t seem to be working. I have connected a USB mouse and a scanner and th...
Summary: hi i build a computer that have 4 usb ports 2 on the back (that works) but the 2 on in the front doesnt work... so how can i get it to work? do i have...
Summary: I need a serial or parallel to USB adapter. Not the other way around. Basicly I need to go from the serial or parallel port on an old POS pent 100 lap...
Summary: My Lexmark X73 Scanner/Printer. Quit suddenly. It points to hardware. Since there seems to be no easy way to test a USB device with DOS, I need some w...
Summary: How do u fix an USB port back to the motherboard anyone knows? there are 6 wires : (1): D+,D-,+5V,GND (2): D+,D-,+5V,GND the pins on the motherboard a...
Summary: I reinstalled windows xp on my system (ECS k7s5a mobo, 256 MB RAM, a 60 and 40 GB hard drive) and now the USB ports on the front of my case don't work...
Summary: Hey all, My problem is that my USB ports on my laptop continually 'freeze' eg. working with a USB mouse, it will work fine for a while, then just stop...
Summary: I have an ASUS P4C800E deluxe and need a little help connecting the 2 usb ports on my computer case to the motherboard. The markings on my case's wir...
Summary: u have a friend who has a webtv which has a usb input for a printer.. her old printer has a parallel output cable and no usb cable. there is a paral...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
