Summary: Microsoft has two articles in Technet about this I will post both 1. PSS ID Number: Q132465 Article last modified on 01-21-2000 :; WINDOWS:2000; ...
Summary: 1Hi, I used to have a Uni-Directional parallel port in my PC Hardware. But now I have a Bi-Directional one. Now, when Windows NT starts it fails to in...
Summary: I had a Win98 machine that I have now made a Dual boot with NT (C=win98 D=NT4). Win98 printed fine through Parallel port (ECP Printer Port). NT does ...
Summary: I am trying to talk to an MP3 player via the parallel port using the s/w package supplied but so far with no success. Apparantly, the player and it's...
Summary: I am trying to write a program using windows NT and access LPT1 and load a pin high and then load a different pin high. I can do this in the other OS...
Summary: Help!! I have two parallel ports installed in NT4, and I cannot get NT to separate them. I have a printer on one and a Superdisk on the other, but the...
Summary: I have been looking for a good solution to access the parallel port in NT. I have yet to find one. If anyone can help I would apperciate it. I am u...
Summary: Does anyone have any experience using a large capacity (> 10Gb) hard drive via the parallel port under Windows NT 4.0 Any and all advice (+ve) gratef...
Summary: hmmm...I've tried using LL3 and LapLink 2000 but it seems that it doesn't support parallel port connection. That's what the LapLink 200 help file spec...
Summary: Tried to install a parallel-port card A4018 (don't know the manufacturer) in a P4 1.6GHz, Win NT, Intel D845PTL motherboard. Did everything as in the ...
Summary: i am installing a pci parallel port in a print server, currently using LPT1, LPT2 and LPT3 for its three printers. I had to install a pci parallel por...
Summary: I am setting up a print server, which will need to have a minimum of 5 printers connected to it. I have a 3-port EPP/ECP 16-bit ISA EX-4017 parallel p...
Summary: I am having a really hard time trying to install a Zip Parallel Port Drive on my NT Workstation laptop. With the Zip and a modem (PCMCIA) installed, ...
Summary: I have only one parallel port installed currently, yet want to use multiple NT-compatible peripherals (printer, scanner, Zip drive, webcam). It's get...
Summary: In 95 it was easy to view your parallel port type (ECP,EPP etc) and to change it by changing the driver through devices. Can this be done in NT and if...
Summary: I am installing a secondary parallel port (LPT2) on a Windows NT server, but after setting the IRQ and LPT settings on the card, NT does not recognize...
Summary: As far as I know, NT doesn't support direct cable connection via parallel cable. However, it will support RAS connections via the serial ports. You'...
Summary: I'am tried a lot of thinks and read a lot of documentation but I'am unable to print when I plug on my computer a HP LaserJet Series II Printer. I've i...
Summary: I have a zip drive, parallel scanner, and a printer hooked to my machine and I am having problems. I am sure all of these problems will be solved if ...
Summary: I have an old Laptop running on Win98, and have a new Desktop running Windows XP. I have managed to connet the 2 using the parallel ports, and have al...
Summary: okay, the problem is now fixed! thanks so much; i went into bios and disabled the plug and plug and then set up bi-directional printing...PROBLEM SOL...
Summary: I have not been able to have the Logitech QuickCam VC Parallel port camera work automatically on a Toshiba Portege 7200 with NT Workstation 4.0. After...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
