Summary: Have you ever noticed how the guts of a PSU are so when you install the thing the heatsinks are down and the circuit board is up? Even with forced air...
Summary: Bought this cheapo Q-tec 450w psu, the issue is that both of the fans blow right out. which means i get a lot of hot air right into my cpu heatsink. i...
Summary: i think i made up my mind and am gonna buy the jaguar 450. i looked at 3 reviews and all 3 of them came up with a great rating and no cons. it seems t...
Summary: I want to do some more modding to my computer and add some more lights and also add 2 more hard drives in a raid 0 configuration. I have a 500W psu ri...
Summary: Hi! I was wondering if useing gloves is safe or good if I ever mod my psu with a see thruu mod or if i where just to change the fans or whatever.. wou...
Summary: If you can also get hold of a dremel with some attachments this would, in some cases, make the job a little easier. Remember, when modding, double che...
Summary: Lo again I just recently got loads of kit for my box, in an attempt to shut it up when I am sleeping. Now my Nexus controller lets me turn off my 120m...
Summary: Well, that case is pretty nice.. very good ventilation. Also great if you are into modding and lights etc. Anyway, the 300 watt PSU should be able to...
Summary: I'm looking to mod my PC a bit, clean up some wires, go to SLI. I've been looking at this Ultra X-Connect PSU due to the fact that it's practically w...
Summary: ooops, got distracted by a movie & forget to click "submit". I see the others are on top of things. "and i dunno about the amp distribution etc. sorry...
Summary: If the SP-500 fan is too loud, (and some other people have reported it as excessive for them too) then there not much you can do about the PSU can you...
Summary: Hi, I recently built a computer and have now found that the power supply I have (OEM with the case) is not going to cut it. My PC specs are: Mobo: Asu...
Summary: hi! i got a celeron d320 at 2.4ghz with an ASROCK P4I65GV motherboard. I'll have a Seagate 40gb hard drive, cd burner, and a floppy drive. I'm not add...
Summary: atarileaf That PSU appears to have more than enough power to run your system. Below is a link with specs on that PSU. http://www.case-mod.com/antec-...
Summary: If you're handy & aren't overally attached to the PC, you could always mod the case to make it accept a standard ATX PSU. I was given an old P2 tower ...
Summary: Hi recently bought a new graphics card the ATI 4890 xxx edition and found that my psu didn't have the right connectors for it so decided to upgrade my...
Summary: Hi. A few days ago I finished installing a g-force 4 (64 mb) video card. I reached over to press the power button but my computer didn't power up. I...
Summary: I was putting the side panel back on my computer with the computer running and the panel jarred one of the wires coming from the Antec Smartpower 2.0 ...
Summary: I agree spend 20-30 bucks and get a new tower... Shuttle AN35N-Ultra AMD 2000+ 1gb 2100ddr Gainward Gforce 5600 128ddr 120GB of 7200 HD space UV Cle...
Summary: First of All, Upgrade the Operating system. It is normal for Win 98 is to crash every 5 minutes lol. For all the specs you said above you can get a de...
Summary: In reference to an earlier post, I have decided to get a new PSU, but just wanted to know will any PSU fit my ATX case? Will it have any problems with...
Summary: Hiya it wouldn't surprise me if that was the case. Personally i wouldn't trust generic PSU's to last a whole day always on, never mind a whole week. T...
Summary: I only just found out (because its the first time i looked) that my PSU is 200W. Is this good enough for: AMD 500Mhz 3D now CPU 320MB PC100 memory 2 I...
Summary: Hi, I'm just watching 4 a new psu and found this one: http://www.hardware-rogge.com/index.php?action=detail&artnr=0059 now i know it has only 15A on t...
Summary: I recently took all of my components out of my PC to clean the dust off of them, and when I reassembled it I couldn't get past the POST screen. Every ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
