Summary: i have a ibm thinkpad 755c and i need a power on password,i cant get any further than the 2 beeps and then it gives me the padlock symbol and i have t...
Summary: My keyboard is not allowing me to enter my password for the Power-on password. Just a lot of dbl key entries and error beeps. did I lock it accident...
Summary: i got a compaq xe 450 givin to me. i loaded the setup on it and seen the password. i setted a power on password to see how it worked and it worked f...
Summary: Hi Carol, Ray here,like the last response iam not sure if your talking about a power on password.If you are you will need to clear the bios from the s...
Summary: thanks for every help befor all machine: hyundy p5000t processor: pentium 133mhz bios: award (npn..) keyboard lock whene power on but continue loading...
Summary: Most PC's have a power-on password facility in the BIOS (hardware setup). If you use this and enable it, DON'T FORGET IT! It's a drag disabling it, an...
Summary: Hello, I just put together a new computer with some of my old spare parts, and when I power on, nothing happens. The HDD LED light stays on, and the ...
Summary: Hey that must be power on password prompt. This pasword is set in BIOS. You must be trying to operate somepc which is not yours. Anyway, if its urs an...
Summary: thanks for every help befor all machine: hyundy p5000t processor: pentium 133mhz bios: award (npn..) keyboard lock whene power on but continue lo...
Summary: When do you see this password? I seriously cannot recall any worthy password protection on DOS itself? Are you sure it is not a BIOS or Power On pass...
Summary: My Compaq Deskpro PC has started locking up on power-up (before the [F10-SETUP]option). If I leave it long enough it finally boots-up with Win2000 (v....
Summary: I have the same problem with my Thinkpad its a A22m IT'S NO HD PASSWORD it's the POWER-ON password IBM says it can't be broke or hacked... we all know...
Summary: my computer has DOS 6.22 and Windows 3.1 - When i power on the PC it shows the brand and type of computer then "BIOS Rel. 1.01" - it then asks me for ...
Summary: Hi there Attempted to build my own PC which probably wasn't the best idea in the world! Upon hitting the power switch for the first time, the inevitab...
Summary: Can you specifically identify a jumper for resetting the CMOS ? Bear in mind, that CMOS reset drops EVERYTHING back to defaults (besides passwording) ...
Summary: I have this computer that was assembled by a friend. It's a Pentium III 866 built on an ABIT SA6R motherboard, 256 MB of RMA, 20 GB drive, CD drive, e...
Summary: Use a boot disk to boot the PC when you switch power on.If you have PC's with a 1.44 A drive use Windows 98 boot disk. It is great to troubleshoot any...
Summary: I'm sorry but ave a different answer . My computer is a Tandon NB 386 SX "portable" in french 'notebook', you see ? So I enter setup by keeping press...
Summary: Hi there, does anyone know how to electrically shut down (power off) a workstation under DOS (any version) as in Win9x ? Existing utility, DLL call, a...
Summary: I would first set the floppy drives for double density rather than the high density you have it currently set for. Then use a double density boot flo...
Summary: thanks for your time !!! I just made up a new self-built computer which contains Pentium 4, buteverything is not running!!!!!since this is my first ti...
Summary: You also have to consider the possibility of a bad power supply (old machine) and noise on the +5v to the keyboard. There is also the possibility of ...
Summary: You're absolutely certain you have the jumper in the correct position... you're not holding the hard drive upside down and looking at the jumper arran...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
