Summary: Hi All, Am new to NT & have a question. I have 2 computers at home on which I have installed NT 4 server. Both are separate PDC's. NIC's are working f...
Summary: Change the name on the PDC first, then the BDC's, finally configure your workstations and member servers to log onto this new domain. Not sure how thi...
Summary: Yes, but if each subnet has it's own BDC the it wouldn't have to cross to the other subnet to authenticate. The BDC's would be connected to the PDC th...
Summary: I would like to replace our PDC that we use as a file server with another server to take its place. I already created another server that I am using a...
Summary: Wanderer is right...YOU CANNOT MOVE PDC's and BDC's from domain to domain...the sids and the account database's get alll screwed over, so it cannot be...
Summary: Hi all, Though I would report back for anyone following the thread. I have it all working now. I am not sure exactly what did it but I did two things...
Summary: Sounds like the WINS servers aren't aware of the PDC's at each end. Setup WINS replication between each network, then try establishing the trust....
Summary: They'll have to be in separate domains with a full two-way relationship established. A domain can only have one PDC but can then have several BDCs. ...
Summary: Sounds like you have a lot of work ahead of you. If two servers are installed as PDC's into the same domain name there would be a problem with autheni...
Summary: I have a remote site with a BDC that cannot see the PDC after both sites changed IP addresses and the PDC changed its name. I can ping the PDC by its...
Summary: You can also set up your new system as a BDC in your existing domain, make sure that it logs in and synchronizes with the original PDC, then promote i...
Summary: NT 4.0 Server Question I am in the process of replacing a PDC. Once the new machine is up and running as the BDC, should I promote it as the PDC, thus...
Summary: I am going to be upgrading my PDC very shortly and just want to run through the procedure in case its wrong. The current PDC is WinNT 4.0 SP6a which i...
Summary: Recently we replaced a BDC on the network with a new HP Server. When we installed it into the domain we used the same name as the old server. (we did...
Summary: I have two domains with two PDC's. I am shutting one down and want to move one of the PDC's to the other domain. What is the best way to go about this...
Summary: Question... When you promoted the BDC to a PDC was the PDC up and running. If not then that is probably your problem. I have read numerous articles ...
Summary: You can promote the BDC's, that "error" message you get when doing it is a little confusing, but that's what keeps us computer guys in business, right...
Summary: I would like to replace our PDC that we use as a file server with another server to take its place. I already created another server that I am usin...
Summary: Since there are two domains and they are not trusted, you will not see (through Server Manager)the PDC listed. All domain controllers will be listed ...
Summary: It seems Jacob's idea is to set the PDC's time. It will work if the user is logging in locally though. I am looking to do the same in a domain envir...
Summary: Yes, it made the pdc's and bdc's reboot, so dangerous stuff, make VERY sure your heyna service account has full rights, including through trusts ...
Summary: most likley cause is that you have more than 1 nt server in the same domain and you havn't copied the scipts onto the other server.Remember that all N...
Summary: Venture. Yes, you can network 2 pdc's but you will have to set up trust relationships for them to share resources as they would constitute 2 separate ...
Summary: I have tried to establish a trust relationship between two domains, and qhen i try to add the trusted domain it says that didn't find a domain control...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
