Summary: I'm using an AZZA U694BX Motherboard PIII - 800e 600 Mbs RAM Nvidia Geforce 2 5 Pci slots 1 AGP and 1 ISA The problem is I can only use 1 PCI and the ...
Summary: Hi, I'm here again! I recently installed a Gainward Geforce 4 MX420 PCI into my machine. Problem is it only allows me in on safe mode with new drivers...
Summary: You're at 143Mhz now? You'll need to get to 148Mhz to make ~2000Mhz and that'll put your pci freq at 37Mhz. If you can even get it there, that numbe...
Summary: My asus a7v266-e isnt recognizing any of the PCI slots, sometimes it says nothing is there, sometimes it says 20 things are there, sometimes it sees g...
Summary: The best overclocker would be the followings... Coppermine Core 0.18 Celeron 566 -> 100x8.5 = 850Mhz Stock voltage 112 x 8.5 = 952Mhz with +0.1-0.2v i...
Summary: To be honest my pc has got to be the biggest pile of s**te I have thrown money at!! Basically I have a 533mhz p'cessor, near enuf 200mb dram and a 32m...
Summary: The Duron only has 64k L2 cache. A true XP3200+ has 512k L2 cache, so even if you can force your Duron to run at 2200MHz, it'll never perform like an ...
Summary: I have a PIII 800E 512 SDRAM PC 133 MOBO - Azza U694BX Via Chipset Onboard Legacy Audio AGP - Nvidia geforce 2 32 mb ram 5 pci slots and 1 ISA The pr...
Summary: I am having problems with chaging the FSB to 133. I bought a xp2100 and on boot I see xp1500+. I changed the jumpers on the MOBO to 133 when the defau...
Summary: If your board supports 166mhz(333FSB), your PCI speed should not be affected when changing the setting. However, if your board does NOT officially sup...
Summary: NO, not battery and not CMOS chip. You are setting the optimum settings and that will get you past the POST but you have to thell the CMOS/BIOS to co...
Summary: Hey, Having some major problems with my Athlon XP 2000+. It's sitting around 75 degrees celcius. It's got a TT 9 heat sink/cpu fan on it, running at 4...
Summary: This is a bit of a long story.... About one week ago I was using my computer and I decided to update my version of asuspcprobe, I never payed much att...
Summary: I am having problems getting my 1 celeron 400 to run at 400 MHz in my abit bp6. In the BIOS, i have the cpu soft menu set as: cpu speed: user defined...
Summary: OK. I have a strange problem with the system that I recently built with an ECS K7S5A mainboard as the base. I now run a 1.1 gig Athlon as my proc...
Summary: i just built a new PC, after i set up my new PC and the 1st time to turn it on, all the fans are running strong, everything seems on, just nothing app...
Summary: I'm no overclocker (at the moment) but figure that those of you who are would be able and kind enough to make suggestions on how to deal with the iss...
Summary: You've got the wrong board for overclocking. End your misery and run at 147/147. Going to 150 causes the pci bus multiple to change to 1:5 and gives a...
Summary: I use 37.5MHz as the safe max for the PCI bus. AGP would be double that, or 75MHz. If you go higher than 38MHz, you run the risk of problems with AGP ...
Summary: Ok, I ran the performance wizard in Sisoftware Sandra, and it gave me these problems: "Warning W2541 - FSB exceeds chipset rated FSB. If you’re over c...
Summary: You have to be realistic about your expectations. Your CPU is designed to run at 633MHz (9.5 x 66.66MHz), probably at 1.65v. The multi is locked at 9....
Summary: this is some else i have just aquired a Acer copmuter with a intel celeron 400Mhz prossesor on it but it had onboard graphics which i did not want so ...
Summary: Read mobo manual: default is EITHER agp first OR not (pci). otherwise: make sure that monitor is plugged all the way into video card, plugeed into wal...
Summary: Hi there. I've had a problem with my AMD XP2700 for a few weeks now, tried several ways to fix it. Here is the problem: I can not run the CPU at 166Mh...
Summary: No. I have this problem with my Asus a7v8x-x. Firstly the thing is set up to start in PCI graphics mode. THEN when you add hardware each time, it will...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
