Summary: Hi, I really need help here because I have run out of Ideas. This is the story so far, sorry about the lenght, but am being very descriptive to make i...
Summary: computer: HP pavilion 500 new hdd: Western Digital 500 GB EIDE operating system (that i'm trying to install): Windows XP SP3 (new disc) So I connected...
Summary: I had a bad defective motherboard. I bought an asus board, installed all components in it and trying to connect the front panel wires onto the board h...
Summary: I have 2 Ide drives and on one I have installed win 2000. I want to have my Sata hard disk 250Gb WD sataII, (jumpered to 150mb/s)installed my XP pro. ...
Summary: After Installing a PCI-IDE card, Syba ATA8212-133R, I cannot use the DVD drive. The DVD drive shows on the my computer, it is detected by Windows. How...
Summary: i cant get into bios because now the pc wont boot at all. i tried every possible thing, wont boot, only the fans spin. any other suggestions ...
Summary: There is no AHCI mode either. I mentioned earlier that I had installed XP on this same system when I first built it a couple of years ago by disabling...
Summary: hi. i just build up a new pc with an old cpu motherboard memory bundle i bought from ebay.. after i put everything togther system powered on fine ,...
Summary: I'm building a PC designed to go into a car. I'm facing tight space issues, so I am considering a solid state hard drive. My only concern was the sp...
Summary: Hi, Recently i added 1 GB DDR1 PC3200CL3.0 RAM to my pc, previously i had 512MB DDR1 PC3200CL2.5 installed.. After adding the RAM, my PC simply wont b...
Summary: Ok my computer wont boot at all all i see is a black screen the full story: I got a new watercooling system that i was planning to connect to my cpu a...
Summary: ive having serious problems and dont know what to do. i have an ak75 mobo that worked well and was very stable until i upgraded it, and now it wont wo...
Summary: My dad's girlfriend's compaq's HDD was about to die, so she wanted to pre-empt the failure by installing a new HDD. I took out the old one and put a n...
Summary: This is driving me crazy, someone please help. The Situation - I have a laptop with a formatted HDD that I am trying to install XP on. The Problem - T...
Summary: You don't need to install Xp on all 3 drives. You only install it on your primary partition on the main drive. The others can be hooked up as slave dr...
Summary: Sounds like Windows XP has detected that you are attempting to boot the PC with a hard drive that was previously installed in a different PC. Since W...
Summary: my pc will turn on but nothing happens... I installed a new 200gb HD yesterday, ran the software for it and while installing windows on it had a fatal...
Summary: When i turn my pc on, fan & mb power up and leds light up on the front then it seems to try to access the floppy drive then theres one beep and the sc...
Summary: A friend and I just built my computer today. After connecting everything and screwing everything and doubling check things we brought it into my room ...
Summary: Sorry about not giving you enough specs. The motherboard is a Seattle 2 P II 440BX ATX mboard w/ Integrated Comp (Millennia Max and ClientPro CS - SE4...
Summary: i think you have too many hardwares installed. if i were you, i will disconnect every thing but 1-HDD,1-floppy Drive and 1-stick of RAM and then boot ...
Summary: System wont boot. It bleeps once but nothing on the screen. All fans are running. I have tried removing each of my 2 sticks of ram but that didnt work...
Summary: I would go into setup first after installing the cdrw. See if it is recognized. Just a feeling that the computer did not know what to do with the new ...
Summary: i trying to fix a pc for a buddy of mine. the problem is that it wont boot. at first i got no video and a long continues beep. when i removed all the ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
