Summary: Also, did you use a good compound and make sure that the heatsink seated to the cpu firmly??? I hope so cuz usually when your pc won't boot because o...
Summary: Hi. I have a Gateway desktop G6-350 with a 350mhz Pentium II processor and I need to upgrade it to 1ghz. When I put the AMD Athlon 1ghz processor in,...
Summary: Hello to all. I have been having a lot of trouble with a system that I have been working on. Its a Asus A7V133-C, AMD Duron 1.2, 256mb ram.. I was abl...
Summary: Make sure all your settings in the bios for hard drives are set to auto. Make sure you have 3.5 drive "A" enabled and drive "B" disabled. Make sure it...
Summary: after transfering everything from my old case to my new Lian Li case and connecting everything, i can't get my PC to power on - i tried to plug the PO...
Summary: Hi , I have problem after I install the new heatsink for my Athlon XP 2000. My PC won't start. It goes on for 1-2 secs. Even the new heatsink goes on...
Summary: Hey, I really need help on this one. I recently swapped my HP's Celeron into my computer and the problem now is that my computer doesn't boot up. Powe...
Summary: i just bougth an xp2000 and put it into my aopen ak77-333 mobo. the mobo won't boot and it sarts to smell badly after liek 5 secs. what's wrong? on te...
Summary: I tried this and you can't change the settings on my BIOS so I did an update...now my computer won't boot up again! I cleared the CMOS again but that...
Summary: Quick question. My p4 2.6 seems to running pretty cool (about 29c idle) so I thought about upping the speed a little. When I o/c as little as 2.8 wind...
Summary: Did you actually plug in the 3-pin or 4-pin(for LGA775) fan connector into the motherboard where it saids "CPU_FAN"? It could be a problem where you ...
Summary: Sabertooth, He has the X2 4400+ & it apparently works fine...it's the Opty that won't boot. Correct me if I'm wrong, but seeing as how there's no FSB ...
Summary: Hello all. I recently moved, and after about a month I finally set up my wife's EMachines T6520 again. It was working fine before the move, but my w...
Summary: Hi, i write you for a problem that i've met with Asus P5B motherboard. First, i apologies for my english level and my grammar error. This is the probl...
Summary: Just changed heatsink and fan and now it will not boot at all. I get the initial screen showing BIOS details and checking memory and one beep. The scr...
Summary: I have an Abit IT-7 board, when it won't boot, i have to move a plastic doohickey over from pins 1 and 2 to pins 2 and 3 and wait 60 seconds and makin...
Summary: I've bought a new A-Bit Th7II mobo with a intel P4. Everything is installed properly (so i think) but when i try to boot it hangs after 2sec without s...
Summary: The original problems sound like something other than overheating to me though. When I've had heat issues, the number one problem would be hard lock u...
Summary: I recently bought a K7N420 Pro mobo with an AMD XP1900+ CPU. I installed the CPU and the CPU fan, hooked up all the cables, added the RAM, and hooked ...
Summary: So here's the story. I recently bought a new MSI mobo 865PE Neo2-V chipset, I got the board because my old board didnt support dual channel mem and ...
Summary: Hi, My PIII CPU(1 GHz, SL52R, locked bus/core ratio 7.5x) won't but at his standard 133Mhz FSB.I have an ASUS TUSL2-C mobo which should be perfectly c...
Summary: My computer has power but won't boot. The fans come on but it will not boot at all. The cd-rom tries to come on when I push the power button but all t...
Summary: Help! My Elements 630CF MB won't boot correctly with a ATA 66,100, 0r 133 IDE cable. It will only boot with one IDE ATA-33 cable. Tried hundreds of di...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
