Summary: Hi, I'm trying to configure PC anywhere on my NT server - it works fine when dialling out of the server into my PC, but when I try and dial in the mod...
Summary: A problem with mapped drive letters on nt server: When NT-Server is started, it has two mapped drives. This is ok. After an undefined time there are a...
Summary: We had a similar problem on our server. We found that when you RE-INSTALL PC AnyWhere on the server, then reboot, it should work fine. Let me know ho...
Summary: How would I upgrade the hard drive on a NT server. I want to copy/clone the whole exisiting drive. Drive copy apparently doesn't work on NT server. Ca...
Summary: I purchased Drive Image 2002 and now I am trying to install it on NT Server. The installation program says that it can't install on NT Server only the...
Summary: I am trying to create a Mac Volume on NT server 4.0. It seems to want to create it at a size of 2 GB big...I need to figure out how to create the vol...
Summary: The server takes about 9-10 minutes to transfer 650-MB to or from the client on a 100-Mb Fast Ethernet network. This seems wrong to me, am I wrong he...
Summary: I am running a novell 4.11 server with Windows NT workstations. I have a DSL modem connected to the hub and no problem with all workstations getting o...
Summary: When a DHCP request is sent to our newly installed BDC the BDC sees the PC MAC address and assigns a ip address in the right scope. However, The PC do...
Summary: Hi.I have just added a 2nd 60GB hard disk to my PC and configured it as primary slave.It is running NT Server 4.0 with srv pk 6a (the OS is on the fir...
Summary: I am trying to install a linksys dsl router on my network. I have a nt server that is a dchp client and my pc (5 ) are win 98. The problem is I can't ...
Summary: Good evening all! Can anybody point me to where I might be able to get some instructions on how to use the 'AT' scheduling function on an nt server. I...
Summary: Hello, I'm looking for help in setting up a small business server with dual NIC's. I am running NT 4.0 enterprise server, build 1381 w/ SP 6. My con...
Summary: Please help I have a file/print server running Nt Server 4.0. I repeatidly get an error message when I try and install a new printer or when I try to...
Summary: I've read that the \USERS directory is the typical spot one would put user home directories under. However after installing NT server, the directory ...
Summary: The AT command can be a tricky one to get working exactly as you want it to. If you can't be bothered with the hassle then try using Poltergiest (avai...
Summary: We got NT server 4 SP5, running on Compaq Proliant 1600, with 2 PIII. What happends is that suddenly (Once a week, maybe twice) the monitor goes blank...
Summary: hi, i got a printer connected to a XP workstation which in turn, connected to a NT server. on other XP workstation, i have no problem accessing to tha...
Summary: i also got the same problem some time back with my NT server, it loads the operating system but when i try to open any icon on it blue screen appears ...
Summary: I developed a business management system using Excel 2000 networked on 5 workstations. Workstations are running Windows 98 on P266 machines with 64 m...
Summary: You should be able yo setup a stand alone server no problem. Make sure that workgroup name on your PC;s and domain name on the server are the same. Al...
Summary: I have VPN on an NT Server all by itself not on a domain. I have Win2000 Pro client on a domain that can connect to the VPN server via UNC in the web ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
