Summary: I have a network with 60 pc's and we use VOIP. The VOIP uses VLAN2. The DHCP server for the computers is on VLAN1. Some of our new dell laptops are...
Summary: How do I share an internet connection (ADSL) between multiple pc's??? Also the internet provider supplies dynamic IP addresses, will this matter? My ...
Summary: I have 2 XP machines on a LAN + several NT and 2k PC's. One of the 2 Servers required rebuilding which are both NT 4.0 servers. Both XP PC’s connected...
Summary: Since your sister is using adsl connection, 10.0.0.3 is home network IP, it's private IP. There is 1 more WAN IP that used by adsl modem/router to acc...
Summary: are the pcs getting their ip from the MS DHCP server? In those dhcp settings is the ms server listed for dns and not the isps dns servers? Imagine th...
Summary: I have 2 PC's both running Windows 98SE connected to DSL modem via workgroup switch. Both PC's can access the internet however periodically both PC's ...
Summary: Server Service: DHCP, DNS Router: Dlink 514 DHCP service is disabled Right now I am using static IP My question is how do I assign IP using the server...
Summary: Can anyone help. I have 3 computers all linked to a linksys BEFSR41 cable router. When i installed it everything worked great. All 3 computers conn...
Summary: Hello all, I'm in dire need for help before I lose all my hair.. I'm trying to connect 2 PCs, both XP Pro. PC A (lady) is connected to the internet t...
Summary: Please Help!!! Computers on the network are losing thier IP addresses and getting logged off the server. The PC's have new Netgear FA-311's in them. I...
Summary: I've never played with the software you mention so hopefully someone who has will answer you with some ideas on what to do from that end. Also, I don'...
Summary: Hi All. This is the issue i'm having with W7 as a server... - connection to internet is fine for all clients - pinging outside world also works great ...
Summary: I am going about moving all pc's from a particular IP range to another IP address range which will be by ways of DHCP. The "old" IP address range are ...
Summary: The Surfboard modem can DHCP up to 25 PC's If you plug the Surfboard into the uplink port of your hub useing a standerd Cat 5 cable and set the other...
Summary: I would like to set up an Exhange 2000 mail server. Do i need a static IP for the server? We currently have DSL through a Cisco 675 router. Once i ge...
Summary: That was my first thought...have the home router get a DHCP address from the first router....But the home router would act as a gateway to the other n...
Summary: (Windows XP Home SP1): I have a BT Voyager 2100 adsl modem/router and a desktop PC connected to it via LAN cable and a laptop connected via wireless a...
Summary: Ron, At least you know one thing, your NIC's are functioning correctly. :) Sounds like a simple configuration of IP addresses issue. One important th...
Summary: Well i have 2 pc's both running windows ME and both have 1 network 10/100 card (ethernet) I want them both to be able to have its own internet. Im pre...
Summary: OOOOPPPPSSSS!!!!! only half a post... ...the modem/router is setup as a DHCP server. The Lan Port is cabled to the HUB, all other PC's connected to H...
Summary: Here is what we have on my home network: 3 computers (different O.S.'s), 1 server, 1 DSL modem, and a Netgear router that does NAT. The server is not ...
Summary: Hey all, My housemates have just got new PC's and we want to set up a network. So Far weve got 3 PC's, 1MAC and a Cable modem. All we want to do is sh...
Summary: I have a network of 2 PC's with broadband internet. The host is a dual boot ME/XP Pro and the client is running XP Home. They're networked and shari...
Summary: Thanks Chad I had tried this previously, but tried again. Beforehand i uninstalled all connections on both pc's. Then set up the broadband sympatico...
Summary: PC#1 and PC#2 both are running Windows XP Home and have thier own IP addresses. External cable modem connection runs to a Netgear RP614 4-port router ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
