Summary: right to start my current ram set up is 1gb 2x 512mb pc2700 ddr 200pin sodimm 333mhz, now this isn't my issue i hope? i had a p4 3.0ghz ht s478 (aweso...
Summary: my buddy asked me to post a question of how far ya'll think he can overclock his P4 HT 3.0ghz Northwood without risking frying the system. stock HSF a...
Summary: you can't unlock the p4. i've asked this question on many board, and no one has found a way. so jsut get a faster chip. p4 3.0ghz @ 222X15=3330mhz 5...
Summary: P4 3.4ghz Prescott Edition Socket 478 V's P4 3.0ghz Socket 775 How do they compare, any ideas i have the 3.4 should i down/upgrade to the 3.0 ??? ...
Summary: So my computer had been running games really bad for quite some time. I built my computer at the end of December '04 and could never figure out what w...
Summary: damasta55r, "YOu don't need a fsb speed of 800 to get 3.0Ghz...The BIOS doesn't really have to detect it properly." What the hell are you talking abo...
Summary: Hi, I just bought a P4 3.0GHz HT (775) system. Is it okay if I use my hard disk (Windows ME, from P3 system), i.e. just plug the old hard disk into my...
Summary: Quick (all right, not so quick) question - was there ever a 3.0ghz P4 offered in the 775 socket, capable of 800mhz FSB, that did NOT support Hyper-Thr...
Summary: Oh didn't know they were planning for a 4Ghz CPU, oh well but what a coincidence, my P4 3.6Ghz can only OC to 4.0GHz lol oh well bad luck for me. OC'e...
Summary: CPU Heat problem ---------------------- I've just recently built a new P4 3.0 LGA775 computer. When I first installed the HSF I messed up the therm...
Summary: Hey guys, gotta question for ya. How does the Sempron 2600+ compare to the P4 3.0 GHz without Hyperthreading? The reason I ask is because I just bui...
Summary: Hello, I currently have a computer with a Intel Pentium 4 3.2GHz w/ HTT processor. I have been using this machine for over a year and I am interested ...
Summary: That motherboard will only run CPUs with 100-133MHz bus speeds. Your 3.0GHz CPU uses a 200MHz bus, and has a multiplier of 15x. 15x200MHz=3000MHz Your...
Summary: hi! I need help regarding this one. I have purchased an ECS L4S8A2 motherboard for my P4 2.0Ghz SL5YU processor. During boot up it ony detects 1.2 Ghz...
Summary: So i tried 2k3 with dx9b @3622mhz got 5890, so i turned my cpu back to up 3640mhz by turning the vdimm up +0.1v. Then i decided to oc the card cause i...
Summary: Well, been OCing my p4 3.2, passed stability test at 215x16 @ 1.550V, so i changed fsb to 220. TSC ran for 2 hours before system rebooted, so i chang...
Summary: I am getting very high CPU temperature readings. I have seen the temperature readings go as high as 87C during boot-up and then the PC will shutdown a...
Summary: Hi, I just got a P4 530 3.0GHz HT (775). And I checked the CPU temperature in BOIS, it was way above the recommended temp by intel which is 38C or bel...
Summary: hi, i have a pentuim 4 3.06 processor(533mhz) running on a msi 865pe-neo2-p motherboard. problem is my temps seem high. im using cpuidle and mbm5 and ...
Summary: I need some help. Im about to build a new pc. I have a p2 running win 98. I am looking at the P4 3.2ghz 800 fsb or the AMD XP 3200. Also have just sta...
Summary: P4 3.06 Ghz can be clocked up to 3.6 Ghz. They have already been running tests. Although, in order to clock-up, you must remove from Hyperthreading ...
Summary: WELL, THANKS TO ALL OF YOUR HELP.. I PUT MY OVERCLOCKING SUCCESS STORY HERE. MY COMPUTER SPEC, CPU-P4 3.2G HT 800MHZ MOTHERBOARD--DFI LANPARTY PRO 875...
Summary: I have a P4 3.2 prescott on a MSI 865PE NEO2-PFS Platinum Edition with an Aerocool HT-101 heatsink and fan (its a beast running 2 fans intake and exau...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
