Summary: does anyone no were you can buy older used hardware for P3-800mhz systems,and under, in canada?I no ebay sells them,but i was wondering if there is an...
Summary: I have a P-III computer having Processor of 1 GH & Mother Board of 810(e)-Tualatin with Award Modular BIOS v6.00PG, an Energy Star Alley,40 GB HDD an...
Summary: I am trying to install windows xp in this laptop : IBM T 22; P-3 900 MHz, 256 MB RAM and 12 GB HD. ................................ During the install...
Summary: first of all just because intel says more mhzs it doesnt mean its faster personally id go for the 3000+ as its roughly the equivalent of a p 3.0 ghz r...
Summary: I just spent the evening attempting in vain to upgrade my graphics card. I have a gateway essentials midsize tower desktop.p-3,128mb ram,20 gig hard d...
Summary: I have one of the very first P-4s ever released--an HP Pavilion with a 1.3GHz P-4. Before you make fun of me, I know that it's old, stupid slow, nearl...
Summary: Gday! just wondering what you think of 1). the quality/reputation of this laptop AND 2). how much you would pay for it max! This is the system: PION...
Summary: To hmmmm... Your computer runs sweet coz you think it's good, But you haven't seem the one that actually runs at a much higher speed. True that you c...
Summary: Hello everyone I just received a Totem TM-S630LM motherboard. Problem is that this company seems to have vanished and I need the drivers and the man...
Summary: Hey, I just got an A7V8X-X Motherboard and for some reason i cannot install the USB 2.0 Driver. When i insert the cd that came with the Motherboard i...
Summary: "When referring to the CPU, it's called "bandwidth", but when referring to RAM, it should be called "throughput"." Not exactly true. Technically spea...
Summary: I have 2 Gateway computers and the same behavior happens on both. They have 5 USB ports - 4 on the rear and 1 on front. If I plug something into the...
Summary: I just burnt my PSU with the HD. Question is, it was a 250Watts PSU and i wonder if i can put a 350Watts PSU on my Old computer which is a P III 800Mh...
Summary: My motherboard recently give me alot of problem. My motherboard will be frozen during the startup. In another world, my motherobard will stop response...
Summary: I've had my custom-build Dual-P3 box for about 3 years. It's a dual p-3 800 with 786 MB RAM and a Ti4600 Vid Card.It has a bootable 20 GB HDD with a 1...
Summary: Well, under furthur investigation, i have a Compaq presario 5012US, i found the sticker with my model #. It has a P-3 1ghz proc. Thanks for your qui...
Summary: you might want to consider this 9700pro as it has a heatpipe and no fan. http://www.sapphiretech.com/VGA/9700proult.asp#Model%20Number here is a link ...
Summary: Ok well I just got a new mobo and a new processor (asus a7v8x-x / athlon xp 2400+) I installed it all and didnt format because I didnt lost nothing bu...
Summary: it probably has built in graphics. where does the monitor cable connect at back of computer? if the socket is fixed to the main motherboard then it is...
Summary: ello, this is my first time here. recently, when i wanna reboot/restart my computer, the motherboard will beep once. and sometimes during window 98 l...
Summary: That's their RC440BX motherboard. The latest gateway bios upgrade is bad. I ran it on one of those motherboards so it'd take a P-3 450. After that ...
Summary: 1.1 ghz is a p-3. those cpu's were maxed at that speed for that board. hp's are very proprietary, and any possible upgrade will be a waste of money. n...
Summary: dear DAVEINCAPS Thanks for reply I had partitioned and formated in different p3 - compaq, computer. I do't have floop drive, if i connect power switch...
Summary: I've looked at the Asus website and it says 2.6+ GHz. What does the '+' mean? Does that mean that it accepts greater values? I'd like to put a P$ 3.06...
Summary: My power supply blew out on me and pc is dead. Now I have a tray for my drive that was in the one that is dead. So to see if the drive is ok I put i...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
