Summary: I used to run a 200 mmx that I successfully O/C-ed to 233mhz. My guess is that there should be some jumpers on the left edge of the board thatyou c...
Summary: Hi i was wondering if it was possible to overlock a 266mhz comp. The reason why i am asking is because after i formated it with windows xp it was work...
Summary: "I think if you could get $40 to $50 for the items you listed that you'd be doing OK." That's crazy. I only quoted one price from Ebay, so don't go to...
Summary: Want to overclock a 233 mmx to at least 262 or even see if the board can handle more. The board is an ASUS txp4 it has the 50 - 75 fsb range default, ...
Summary: OK...It took a little digging, but I found your board...the numbers you found on it were the key. It's a Shuttle HOT-557 ver 1.5 It's not a great boar...
Summary: Hi, I have a pentium processor with MMX technology. Its a 233 Intel Chip. I have an old Compaq Presario 4526. Which i bought in 1997. You can look up ...
Summary: ok, I am gonna get my hands on a 166mhz MMX laptop, and it's overclockable. I want to overlock it at 200, or 233. What should i look out for? how hot ...
Summary: I was just wondering if it is possible to overclock a pentium mmx 233 to higher speeds, the multiplier is set to 3.5x, fsb to 66mhz, and voltage to 2....
Summary: Help! I have an AMD-K6-233. I bought it used and dont have any documentation for it. When i start the comp; after it checks my ram; it says AMD/233 MM...
Summary: i need the jumper setting for a 5vgm m101 motherboard with a 233 intel 233/mmx.i found where it will support a 233 but all i coud douwnload is quick r...
Summary: I used to have my 233MMX clocked at 250mhz (2.5 x 100), but you may be able to get a little more out of it...depends on your board specs & what type o...
Summary: Derk, as I mentioned before. I have 2 computers of the same model at work. I've opened their cases up a couple of times for upgrades including the CPU...
Summary: i just read this thread and this caught my eye "My dad had a mentium mmx running at 166Mhz (not sure if that was called Pentium 1 though) and I inst...
Summary: lazyman, until a threshold is reached the device works like always. After that it stops working. It either works or it does not work. If CPUs die, the...
Summary: Help! I have an AMD-K6-233. I bought it used and dont have any documentation for it. When i start the comp; after it checks my ram; it says AMD/233 MM...
Summary: i have a pentium 2 233 mmx and i want to clock it to the best i can i have five fans on and in the comp and one big fan on the case. the comp has 32 m...
Summary: What the bios says is not always truth. Check the speed with another tool. I have a K6-300 running at 233MHz, but the bios report "-S" instead of 233....
Summary: Hi, I have a Abit KT7 (new bios) and a Thunderbird 1200 Mhz C. Can someone describe me how and with which tools i can overclock this CPU? Need ya help...
Summary: yes thank you for your help but i have a 40gb hdd in this computer and it runs at 7200rpm and windows sees 32 gb of it because the bios wont see the f...
Summary: Hi, I need some help overclocking a Genuine Pentium 4. Its currently running @ 1.6ghz. But i want it to run at 1.9 or higher. Mobo: MSI,MS-6533 Chips...
Summary: thanx great gamer i have been reading quite a lot of your questions etc and realise that u r doing the same as me, have any recommendations?? My PC: T...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
