Summary: Ok so here are the issues i've been having As i type i have it at 10x and 1200fsb =3.0 666.7 ram if i were to lower the multiplier to 9 and up the fsb...
Summary: well im new to overclocking and wasjust wanting some suggestions last ninght i upped the cpu voltage core to 1.8 and the fsb to 212mhz @ almost 2.7ghz...
Summary: Ya so I built 2 systems with the Asus p4p8X mobo and a 2.4C chip and DDR333 Ram, They both had this issue. I did some research. You can get rid of the...
Summary: I bought a new retail newcastle athlon 64 3400+ 2.4GHz a week ago which I successfully overclocked to 220FSB (*12 multiplier = 2640MHz). It worked gre...
Summary: Hello, I have successfully overclocked my computer's bus to 280mhz on my Shuttle KT266 board. This means my CPU is at 1190mhz. Also, memory is made by...
Summary: hi, i have managed to over clock my cpu P4 524 to 3.81 Ghz and its running stable, i have a xfx 8600 Gt Fatal1ty installed, on these setings 3d Mark g...
Summary: My stats are below in my signature. Question is if I bought a newer am2+ board capable of 2600 HT and i had a 2000 HT CPU and the RAM on the board is ...
Summary: I have the MSI version of that card, and it works well. Considering it is very cheap (in canada at least) it is well worth the money. I paid only $...
Summary: I have an Athlon 1.4 on an Epox EP8K7A motherboard which has hardware montoring which tells me temps and voltages, etc on boot up. The temps were abou...
Summary: I agree that Asus/MSI and Epox may have better customer support than ECS. PC Chips are part of ECS and they do not have any kind of customer support w...
Summary: So do you reckon that the Zalman would cool it enough to replace the stock cooler and not have any overclocking issues? I need to get my pc quieter as...
Summary: You're asking in the wrong forum. This appears to be a software issue, possibly hardware...not a CPU/overclocking issue. "i have a ton of reg fixers o...
Summary: Go into the BIOS & set the system configuration to default values, then see if you can play your game without the system crapping out on you after two...
Summary: What issue - FSB Hole? Latest BIOS or not, the reality is: PCs don't perform identically, even when they are configured identically. You are not going...
Summary: Personally I've never overclocked RAM-you would have to worry about the RAM voltage then, perhaps. Heat is not the only issue with overclocking. Why d...
Summary: I realize you've been struggling with this for days now & I really wish someone could come up with a solution for you...you (we) must be missing somet...
Summary: Looks like your latest thread got yanked. Anyway below was my response posted within a split second of that thread's removal. "Bill, You need to keep ...
Summary: highly unlikely to get much gain if you can overclock it...cyrix cpu's are 3rd rate...my guess is that you would have stability issues also the intel ...
Summary: Even though all three variants of the 2000+ are locked @ the same 12.5x multiplier, if you have the thoroughbred or thorton core you will have more he...
Summary: I know that the 9600SE is junk, but that's what he has and the reason we are overclocking is because he has no money to upgrade and I mean NONE becaus...
Summary: Anyone here have an A7V600 and tried overclocking? I want to see if the same issues that I have can be repeated with another board. I currently have...
Summary: Did you visit those sites I posted? Did you do anything about the memory issue...my guess is you're killing your system by running 256mb RAM. Try it a...
Summary: You can try Panaflo's Ultra quiet or Vantec's Stealth quiet fans to cut noise to a minimal level. Overclocking the XP 2500+ is now by far the most dis...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
