Summary: OSX 10.1.5 installer cannot see the destination disk on a G4 500 AGP/512 Ram which already has 9.2.2 installed. I have already re-initialized to HF+. ...
Summary: Hello, major thanks in advance to anyone who answers. I thought my 180 couldn't see a Teac CD-R56S I've got in an external case (don't worry, I wasn'...
Summary: I can not install iDVD on my Titanium G4 Powerbook. Should iDVD install and run on the Powerbook? Any guidance will be most appreciated! I would enjo...
Summary: I have this problem with my iMac. I can't turn it off, cause if I do, then when I try to turn it on, the screen won't turn on. So I leave iMac on slee...
Summary: hi, Me again. i have 2 computers one with os10.3.9 and the other with 9.2.2 and a printer. when both computers used OS 9.2.2 i used to share the print...
Summary: I have a powerbook G4 and a windows PC both behind a DLINK router. THe PC can ping, map drives etc. to the mac, but the mac can't even Ping the PC. ...
Summary: Stats: Macintosh G4 (1GIG processor and 1GIG of RAM). Main software: Photoshop 7.0; Illustrator 10; and Quark 4.1. I'm a long-time, professional gr...
Summary: I have installed a harddrive on my NT4 server. I created a new volume for the Mac users to see this new drive. They can see it and all old files tha...
Summary: I've had this problem for a while. When insert a blank CD-R, my imac doesn't see it at all. Same if I run Disk-burner, it doesn't see the CDR. ...
Summary: I had a OSX and OS9 installed on a same system. I also had a win2003 server with mac shared partition created. I am able to locate my win2003 server v...
Summary: I am trying to clean up the Hard drive on an old Mac Classic II that I want to dispose of. When I start it up I get a ? sign in a floppy icon. I check...
Summary: I'm working with a Sony Digital 8 Camcorder on a G4 PowerMac OS 9.0.4. So far everything's been fine (I've used FCP, Premiere 5.1.c and iMovie for edi...
Summary: Are you set up to use DHCP or a STATIC IP address? I'd ping my own IP address for starters. If you can't see your IP address settings either your ne...
Summary: HOW TO GET BACK TO DEFAULT RES??.... I changed the resolution of my dual monitors to a lower resolution and both of the monitors immediately gave the ...
Summary: No, the toolbar is not greyed out, just the resize arrow. I am able to click the "more" arrow above the resize arrow and get more tools listed, but ...
Summary: I have 5 staff Mac OS, Intel based, that I’m trying to connect a shared device that’s connected to a windows server. The problem is that 3 of the...
Summary: I have a powerbook 12", my problem is after playing with an psx emulator I decided to quit the emu so I did on full screen and since then it's with a ...
Summary: When I open .asf and .wmv file in WMP for OSX, I can't see the video. I can on older .asf and .wmv files, just not those made for "wmp9". Same prob...
Summary: I got a used Beige G3 MT with a 4GB Seagate HD. Thought it might speed things up if I put in a WD 7200rpm 30GB HD - just swapped ATA drives. Could i...
Summary: Hello, I have installed 10.2.6 on my 9500 upgraded to G4, but I can't "clean" switch between OSX and 9. The processor upgrade card is a nice xlr8 MACh...
Summary: Hi Michael, Good to know I'm not alone in experiencing this problem... ;-) [Suggesting that the cause is some software (upgrade??) installed recently....
Summary: Ok, i have the all in one running Jaguar. I want to switch drives from the old one to a 40 GB Western Digital. It is formatted for windows and the o...
Summary: Hi, I am trying to install OSX to my imac with 9.1 on it. I put in the OSX install disk and it restarts and when the install prompt comes up, it asks ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
