Summary: I'am using Alphastation 255 for process control . It comes with a 4.3 GB harddisk which is now making terrible noise after many years of operation . I...
Summary: Hello, Need some help. I have several Alpha 433au work stations running OpenVMS 7.1. I need to upgrades them to OpenVMS 7.2. I already have the 7.2 C...
Summary: Hi, As a long-time user of VMS/OPENVMS, I really did not need or use pc's or windows, etc. Now I do! I need to move files from the off-line Alpha to ...
Summary: Nadeem, You may need to use a newer version of OpenVMS (current VAX version is 7.3-1, current Alpha/Integrity version is 8.4) or apply a patch ("ECO")...
Summary: Hello friends. I m using OpenVMS 7.1. Plz Tell where i can find DCL commands in detail. and other operating commands for alpha server 800. i have vis...
Summary: Is it possible to run Tomcat 4.0.1 on a Compaq Alpha Server, running OpenVMS version 7.3, without using CSWS. I would like to set Tomcat up like you w...
Summary: I am trying to get information on how to map to a tape drive on a Vax machine running OpenVMS 7.1 from an Alpha Workstation running OpenVMS 7.2. The ...
Summary: I have a stand-alone alpha 433 running openvms axp v 7.1. A recent power outage forced an un-orderly shutdown. I had a floppy and a cd inserted (non...
Summary: In Vax/vms with STABACKIT I can create a system minimo in another disc and load of this disc the S.O to refresh the system disk. As it is the procedur...
Summary: Hi, I have Dig.Personal Workstation 500a, Processor Alpha 21164, AlphaBIOS Ver.5.68. This hardware was not being used for long time, now I am, a OpenV...
Summary: Hi Folks, I'm a total OpenVMS Newbie, I bought a used AlphaPC 164SX based system with DEC Alpha 21164PC with RM Console on it (Ver 5.8-1) and I'm tryi...
Summary: The Alpha Openvms V7.2-1 system has been restarted. And now I am looking over what more needs to be done. I have found that TCPIP needed to be rest...
Summary: Box is running openvms 7.1 and UCX 4.2 . I have an ethernet wire from box to the cable company modem. I read that all I had to do was to configure TCP...
Summary: This box (vax4000-300)was given to me to wiht with [OpenVMS VAX (ver6.1)]. No problem with startup before today. I can startup_p1 "MIN" to get inside....
Summary: Hi, In order to complete a OpenVMS system courses for operator taining, i would like to get some new ideas in order to perform a troubleshooting sessi...
Summary: Really need some help!! I'm a complete VMS neophyte hobbyist. I installed Open VMS Alpha 7.3-1 off of a Hobbyist Kit CD-ROM onto an Alpha Station 20...
Summary: OpenVMS Version 7.3 Total Memory 1 GB When I do a "Show Mem", the last 2 lines are: Total size of all paging files: 437472 Total committed pagin...
Summary: Hey, I have little experince with VMS and I need to install on this system. Well actually reinstall it. Because I can get the UI to load up (it is an ...
Summary: Don't know if it is possible directly. In fact, i'm quite sure this is not... But what i do is a DCL script which takes a NT username and a message, a...
Summary: Hi. I have an 4300 at 7.1. I lost lost disk 2 of a 2 disk bound volumeset. I have a good image backup of the bound volume. My question is how to resto...
Summary: We've had a vaxstation 3100 boot node running VMS 7.1 up and running for several years. A couple of weeks ago one of the drives gave out so I replace...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
