Summary: hi everyone .. i bought recently amd sempron 2800+ 64 bit (palermo) socket 754 and ASrock K8NF6G - VSTA motherboard , and its running at 1.6 as most o...
Summary: The nforce3-A mobo gives the option for oc up to 250Mhz but i hit instability at 232mhz which means i am only getting a max of 1.86Ghz from the Sempro...
Summary: I'm doing the exact same as the original poster. The nforce3-A mobo gives the option for oc up to 250Mhz but i hit instability at 232mhz which means ...
Summary: I'm building a new system and I've never done any overclocking before. I'm putting a sempron 2800+ Palermo Core with a stock fan/hs on an Asus K8N wh...
Summary: Im having the following problem. i bought an amd sempron 2800+ 64bit socket 754 and a biostar K8NHA Grand motherboard. i wanted to overclock it but i ...
Summary: Hey I am going to be buying a laptop tomorrow. Now, I have a choice between Toshiba and Acer. I don't know which one to choose. Toshiba is more truste...
Summary: Hello to you all. I have a Asus M2NPV-MX Mobo with AMD Sempron 2800+ 1.6ghz RAM is 512MB DDR2 PC667 1 stick. I am wondering what settings I can use ...
Summary: hi, i would like to know how i can unlock my cpu(AMD Sempron 2800+ @ 1.6 ghz, socket 754) so i can try to overclock and change the necessary BIOS sett...
Summary: Does anyone know if the multipliers are locked on the Sempron 2800+ ? Currently running in an Asrock K7S41 166MHz and 12x multiplier, would like to dr...
Summary: Hi thinking of getting a sempron 2800 or 2600 as i have been told altough at standard they suck pretty bad when overclocked you can reach speeds of ar...
Summary: I have an Asus M/Board, K8V-X SE VIA CHIPSET AMD Sempron 2800+ "Palermo" socket 754 1 GIG DDR 400 RAM ATI Radeon x1600 Pro 512DDR Any advice on overcl...
Summary: I just replaced my athlon xp 2800 with a sempron 2800 as the athlon burnt out after a bad crash the problem is the acorp site gives a update for a PC...
Summary: I am trying to oc my 2800+ My temps are fine, like in the 40s. My cpu becomes unstable however before i hit 174 on my fsb. The only voltage change m...
Summary: I recieved mine yesterday and it runs great at 200 fsb cpuz shows mine sempron 3300+ core= barton core speed 2191.2 multiplier x11 fsb 199.2 bus speed...
Summary: An Athlon XP is old technology now and spent its last years on Socket A.. If you got a socket 754 Sempron 2800+ anginst a 2800+ Athlon XP on socket A ...
Summary: hey everyone! can some one plz give me some help/advice. i have NEVER oc'd a cpu b4..and i know it can be dangerous...so if anyone could help this noo...
Summary: I intend to change my current Duron 1800 processor for a Sempron 2600 or 2800. I intend to change only the CPU and reuse my heatsink a Themaltake Sile...
Summary: I forgot to mention...it is up & running at 10.5 x 185MHz at 1.824v. It's being recognized as a Sempron 2800+. I haven't tried running Toast or Prime9...
Summary: ok, I realize that i cannot OC my cpu anymore do you have any ideas on what I can do about the DFI lanparty problem I stated? DFI LanParty UT 250 Gb S...
Summary: I did my xp 2800+ to xp 3200+ overclocked, like this http://users.skynet.be/kelvin/docs/mysystem.htm now I did push up the Vcore from 1.65v to 1.70v, ...
Summary: Hmm.. I had a Barton 3000+ but sold it in favor of keeping my Sempron 2800+ The Sempron 1. Can run up to 400 MHZ+, therefore keeping it in sync with P...
Summary: The Sempron 2800+ is the equivilent of the Athlon XP 2400+ & will be recognized as such unless you update the BIOS to a version that supports the Semp...
Summary: I'm trying to oc my AMD Sempron 2800+ from 1.6 to 2.0ghz. I manage to get it 1.8 (225mhz) but whenever I try 2.0 (250mhz), the computer doesnt go to P...
Summary: Hi i have a tight tight budget I want to play mainly strategy games perhaps a few fps if its plausible Im trying to figure out a CPU and Video combina...
Summary: Hello, I currently have a computer with a Intel Pentium 4 3.2GHz w/ HTT processor. I have been using this machine for over a year and I am interested ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
