Summary: I am trying to implement a log on script to where it maps the folder from the server depending on what there username is and the folder is named the s...
Summary: I am trying to create a log on script for the users on my NT network. We are currently running an NT4 network with a PDC & BDC (the BDC is a DHCP Ser...
Summary: Is there any freeware application that can monitor & log what a user is doing to shared folders/files in an NT Server? I am having problems of user(s)...
Summary: Hi, If you have 2 x Nt servers then one is running as PDC and one BDC? And i presume your just adding 2 more BDC's to reduce laod on the other server...
Summary: I am running a NT server as a ghost server. After running into to the error and having neither the emergency repair disk or the NT Server OS on disk ...
Summary: I sold a unisys sgs 4200 server on the internet and I want to put nt server back on the hard drive for my customer. it goes through the setup process...
Summary: My office's NT server (built on a clone) has this terrible habit of rebooting itself on & off without warning. The vendor suggested changing the power...
Summary: I am trying to install NT Server 4 on a 700mhz machine that has a 20 gig hard drive, also an Athlon processor. I have tried every which way--starting...
Summary: I am trying to install OS/2 Warp 4, Windows 95, and Windows NT Server 4 on my Compaq Presario 4814, a 233 Mhz Pentium with MMX 160Mb RAM 2 6 gig HDD'...
Summary: Hi ya, My experience with this issue is that it's and event #5513 or #5722. See Microsoft Knowledge Base Article 150963 Or follow these steps: On the...
Summary: I have a NT 4.0 sp6 server AND a Novell 3.12 server on the same lan. I have one win95 workstation set to login to the NT server. When I login it runs...
Summary: My NT 4.0 Workstation cannot be logged on to the server. It has been sitting idle for almost two months (unused). I seem to remember that something ...
Summary: I have a NT 4.0 sp6 server AND a Novell 3.12 server on the same lan. I have one win95 workstation set to login to the NT server. When I login it runs...
Summary: Good evening all! Can anybody point me to where I might be able to get some instructions on how to use the 'AT' scheduling function on an nt server. I...
Summary: Help, im in trouble. I have a network card in my pc. But someone has formated my hard drive, and it has no cd-rom. I have put dos back on, how can ...
Summary: Hi, I'm trying to configure PC anywhere on my NT server - it works fine when dialling out of the server into my PC, but when I try and dial in the mod...
Summary: Ok.. this is what I can imagine your problem is. you are first having problems accessing the share. Sounds like you are a part of a workgroup so that ...
Summary: Hi Folks, My WIN NT Server also doesn't boot to the Admin log on. It is freezing at the blue screen. My server is Micron NF6200 and all HDDs are SCSI ...
Summary: The AT command can be a tricky one to get working exactly as you want it to. If you can't be bothered with the hassle then try using Poltergiest (avai...
Summary: I have a new Win98 laptop that I'm trying to use to connect to my NT Server (I'm a relative novice BTW). The laptop has the following configurations: ...
Summary: I am having a problem with my windows 98 computer logging on to the WinNT Domain. I'm using tcp/ip and both have ip addresses and subnet masks and ...
Summary: I can't log on to my company's server. It was working fine last nite, but i logged off,then tried later to log back on, and it won't let me. invalid p...
Summary: Hi! The following error occured while I was creating a user details for a fellow worker on our NT Server. "system could not allocate the required spac...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
