Summary: Hi. I've been trying to get my CD-ROM to work but I get a "No drives found, aborting installation." error. My CONFIG.SYS has "DEVICEHIGH=C:\DOS\OAKC...
Summary: Started with windows 3.1. I formatted drive c in hopes of installing W95. Downloaded a W95 boot disk from bootdisk.com, used this with W95 cd and rece...
Summary: hey i need HELP!! with my computer when ever i start-up my computer it says: loading cd-rom drives-------------no drives found aborting cd-rom instal...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! Here is the problem folks: I was trying to upgrade from 3.1 to Windows 95. There was not enough disk space a...
Summary: Thanks, i downloaded to floppy from disvr.cjb.net DOS 6.22. The second page displayed the following: CDROM Device Driver for IDE (four channels suppor...
Summary: I have a 24x IDE cd-rom I tested it in a 466mhz system and bios found it and windows98se installed drivers for it, when I tried to install it in a 486...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! I am in need of some serious help here. I have been through every one of these messages at least twice! And ...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! Here is the problem like tons of others are having: I was trying to upgrade from 3.1 to Windows 95. There wa...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! I am in need of some serious help here. I have been through every one of these messages at least twice! And ...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! Here is the problem: I was trying to upgrade from 3.1 to Windows 95. There was not enough disk space availab...
Summary: Also, while I am here, I am also trying to get my cdrom working. I downloaded the cdindos.exe files and installed on my 486. Now at boot up when it is...
Summary: I have a friend with a computer problem. It's from the early nineties and his CD rom drive is Creative. The hard drive is 2GB. He doesnt have any USB ...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! Here is the problem folks: I was trying to upgrade from 3.1 to Windows 95. There was not enough disk space a...
Summary: HELP! HELP! HELP! HELP! HELP! HELP! HELP! Here is the problem: I was trying to upgrade from 3.1 to Windows 95. There was not enough disk space availab...
Summary: Hello, I just recently semi-resurrected my family's old Gateway 2000 4DX2-66V that we got back in 1994. All it needed was a "new" power supply to get ...
Summary: I am trying to install windows 3.11 on an old 486 IBM i use win 98 boot disk to reformat and it seems to clear it ,, problem is i cant find a proper p...
Summary: Don, Thanks for the tip. I tried the driver and got "no cd found aborting installation" followed by "no valid driver" after the mscdex command line. ...
Summary: I made the boot disk and it booted win 95, now i get the following: Driver : v340 Device Name : Banana No drives found, abotrt installation Device Dri...
Summary: I was trying to install win98 on my really old computer (it has enough ram and space though). So I formatted win3.1 in order to install 98 (as its not...
Summary: I have tried out what you suggested. It boots up from the disk however it says there has been no drivers found for the CD ROM drive and therefore abo...
Summary: If the hard drive controller has failed,the hard drive won't be recognised by the bios.This controller electronic circuit board is on the hard drive.T...
Summary: Hello: I setup a "1998 Pioneer DVD-102 DVD-ROM ATAPI DVD-A02X 0105 CD-ROM Drive" on Primary IDE Cable (middle connector) as "SLAVE" . . . but, when tr...
Summary: I forgot to mention the CD Rom works fine until the sound card installs. Than the Sound card works fine but the CD configuration is a mess. I have t...
Summary: Her again, have just installed Aureal SC/8738 sound card on fujitsu ergopro x, programme is supposed to self install, but no such look, I think syste...
Summary: Does anyone know a site where I can download win95_14.cab file? I need to load it on to a computer with windows 3.1 (Micron 386). I have win 95 CD, ...