Summary: Hello to all, I got roped into helping an in law with an old 486 lagacy machine. There are no pci slots or IDE channels on the mobo, just ISA slots, p...
Summary: DOS mouse drivers & Win3xx mouse drivers are completely different entities. Setting up a mouse under DOS in autoexec.bat etc only enables it for DOS a...
Summary: No mouse for an 8088, the keyboard from an old 286 will work, where is that old Laser keyboard? um-- the keyboard will have XT or AT\XT Compatible pri...
Summary: Try reinstalling drivers for it. to do this exit windows change to your windows dir. type setup select no mouse or other pointing device exit reboot r...
Summary: I just fot a IBM and it had windows 3.1 on it. I pluged the mouse, keyboard, Monitor and power cables in and started it up. For some reason I can't ge...
Summary: My mom bought a new mouse for her old 486. Win 3.1 has been recently reinstalled. Radio Shack told her the correct drivers should be already installed...
Summary: Hi, I've set up 3.11 a couple of times already and no problems. DOS 6.1 and then 3.11. But this time the mouse doesn't work. I set up DOS and the mo...
Summary: My mouse and keyboard work perfectly in MS-dos and during the 3.11 for Workgroups installation process. However, when that's done and I reboot and ty...
Summary: This 3.11 machine was working fine until I connected to the internet with AOL 3.0. I did get on the internet, sent one email and viewed one web page....
Summary: Mouse should only cost a few bucks to replace... There used to be a shareware proggie called 'nomouse' for Win31 - have it here somewhere, but it time...
Summary: i looked threw the c drive and ddnt find anything about a mouse. I have no clue what autoexac means or how to find it, im not really used to working ...
Summary: There is a file in the Windows directory that you can check to see what mouse driver windows is looking for. It is SYSTEM.INI and under the [boot] sec...
Summary: This might be easy to fix, but a computer i was given had no working mouse so i reinstalled a driver (MSMOUSE), but even though there is a pointer, th...
Summary: Hello everyone! OK. At first I thought my mouse was broken, but now I tried it on another computer (with Win98) and it works fine... But it doesn't wo...
Summary: We use a 486 dinosaur to run PCAnywhere for our remote network access. We have recently purchased an upgraded external modem. The ancient modem is a ...
Summary: I recently tried out calclean on my machine to stop the bloating in my start menu with calmira. It seemed to work ok, but i noticed that the dos prom...
Summary: I'll look for the file.This may help a little too. Config.sys DEVICE=C:\WFW\HIMEM.SYS /TESTMEM:OFF DEVICE=C:\WFW\EMM386.EXE NOEMS BUFFERS= 40 FILES=80...
Summary: My Contura 3/25 was working fine last night until I went into System Setting to try and give my notebook some color. I changed something to or from VG...
Summary: Machine boots to Win 3.1 okay but if I go back to a DOS prompt and alter anything using Edit and go back into Win 3.1 I lose the mouse. Ctrl/Alt/Del d...
Summary: Hey, I'm building a machine which dual boots 3.1/95 via acronis OS slecotr. All is good. I go into DOS 5, install drivers (found on Creative site, got...
Summary: i have a compaq 4/75cx laptop the spec is intel 486 75MHz 500Mb Hard drive i formatted the HDD and put dos 6.22 on then installed windows 3.0 when i b...
Summary: THanks Z, but I'm still not clear about his. I know what sort f slots my machine has, but i don't know what a control card is. Is it the card with the...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
