Summary: Hi, Please who can help me, I bought a new Hard disc and want to make a fresh installation of w2000 pro. (The HD is already formated, and no existing ...
Summary: I have a dell poweredge 2400 server with a 52gb hard disk. The problem is we are out of space and need to add a new hard disk. Dell says a new 36gb ...
Summary: You need to put the new hard drive as slave and turn on your computer so that you can boot ibto whatever OS that you have. When you are booted up and ...
Summary: I just bought a new hard drive and I'm trying to install win 2000. I was under the impression that this could be done directly from the CD. I went in...
Summary: Hi, My NEC laptop hard disk is not working and I bought new hard drive. How can I install Windows 2000 in it. I have the windows 2000 CD. should I for...
Summary: Thanks for your response FJ. Sorry I neglected to mention that I am actually adding this new hard drive, not replacing the existing hard drive. My onl...
Summary: i started with a japanese win me setup, partioned the the 40gb hard disc and installed english me using system commander to switch between them ...
Summary: My laptop (1.7 Ghz centrino, 512 MB RAM, 40 GB HD) seems to have a bad HD. I am looking for a new one, but I was wondering one thing. May the defectiv...
Summary: did you make the new 60gB drive a "slave" to your older drive? If you have them both on as "master" then you will be getting conflicts possibly causi...
Summary: Ok, I have a win98SE machine, AbitBE6II mobo and the onboard highpoint ata66 controller with a 20 gig hard drive. I used partition magic 6 to make an...
Summary: Hey guys. I just bought a new hard drive and I'm not able to see it's whole capacity. when I go in FDISK, it only detect 12GIG or so. Is there a way t...
Summary: Guys, maybe ya'll can help me out a little. I'll provide as much info as I can. I was given a computer by a friend. The previoius owner said it work...
Summary: I have a 10GB hard drive, 1100KHz AMD Athalon processor and 512 MB RAM. Just bought a 80GB hard drive to run as a slave. Set it up as a slave and come...
Summary: Hi there. I want to move my Win2k system to a larger hard drive. With Partition Magic 7 i copied the system partition successfully to the new drive. A...
Summary: Ok, I got a new pc, I want to transfer my files from my old one 2 the new one, should I just take my old one out, set it to slave? And then connect it...
Summary: I have a new machine that I'd like to set up with server 2000 but the hard discs are not recognized. How do I go about getting it to do so? Thanks. ...
Summary: Just remove the 4GB hard drive, install the new drive (make sure the jumper is set right to master). If you want a single FAT32 partition over 32GB yo...
Summary: i have an old computer which i wanted to install a bigger hard drive on. it was going to replace the old one i had so i bourght an new one. i put it o...
Summary: I want to install a larger hard drive, then use it as my master boot disk. Then make my existing smaller drive a slave. How do I transfer the operati...
Summary: It doesn't matter how you partition your hard disc. Just make sure that your primary partition (the one that you install win2k onto)is minimum 2Gb. If...
Summary: I have a Abit kt-7RAID motherboard and have been running W2K pro for nearly a year, recently I bought a new hard drive and installed it onto the machi...
Summary: Does Your colleague have total power of Your pc from his own Windows 2000 pc? Yes – If You can install programs or can run defrag (drfg.msc) on Your o...
Summary: I put in my W2000 CD to attempt a repair - it didn't even recognise that W2000 was already on the computer! Anyway, I 'upgraded' to W2000 and the prob...
Summary: ok so im going to buy a new hard disk with more space in it. the old one is 10gb and the new is 30gb and i was wondering if some how i could transer a...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
