Summary: Dimension 8100 C: Drive 20GB IDE H/D SATA PCI Host Controller F & G Drive 2 * 80GB Hitachi Deskstar SATA H/D Requirement Transfer all the data from C ...
Summary: I'm going to buy a new sata drive soon and was wondering if I needed to install the sata driver during the XP installation or should I install XP then...
Summary: I recently bought new SATA drive. I have noticed that it makes louder noise than my other drives (older SATA and ATA), when there's activity on that d...
Summary: You can make an image of the old drive and transfer it to the new sata drive, you will need to make it the the first boot device in bios. SATA drives ...
Summary: Hello! So, i've been slowly updating my computer as i go along, with new pieces of hardware. It reached the point where i felt my hard drive was bottl...
Summary: Sorry for the confusion, MY computer is self built but as I stated in the initial post, this new SATA drive was for my son's computer. The original dr...
Summary: Well i got an 80 GB SATA drive for my new Compaq. I figured i would give Vista a go and maybe get used to it. Well i used the recovery CD's that i ord...
Summary: can you see the drive in the BIOS? if yes, good and let's troubleshoot. if no, and you've definitely connected (and tried re-connecting) data and po...
Summary: hi, I generally use a brand new HP laptop with vista, however I wanted to do some work getting a new WD 160GB SATA drive up and running. I have an old...
Summary: So I am building a new system and I have all the parts I need. I'm using my Hard drive from my old computer as it has my OS system but I have a Samsun...
Summary: I installed a SIIG SATA controller card, and attatched a new SATA drive to it. Well, I don't see the drive anywhere in the Computer Management/Local s...
Summary: I had the same problem when I bought my computer last week: Asus K8V SE DELUXE SATA Seagate 80GB CONNECTED TO THE SATA1 Slot on motherboard! 1024MB RA...
Summary: I have had to buy a new h/drive as my current one is getting noisy and programs keep locking up. If I install the new one as master and the old one as...
Summary: Hi. I bought a computer about three years ago with a 40gb hard drive. Since then I have upgraded it bu adding an 80gb hard drive and it worked fine. ...
Summary: I'm stumped on why I can't get a second SATA HD to work on my computer (P4 2.8 1g RAM) with MSI 865PE Neo2 board. History: XP was freezing so I ran d...
Summary: Ok I have new sata drives installed and ready to set up a raid 0 on my new system. Thanks to the flimsy ass motherboard manual I dont have needed info...
Summary: My Asus P5ND Bios refuses to detect my new Western Digital 1TB SATA drive. Attempted so far: Tried different SATA ports (Mobo has 4) Tried different...
Summary: I currently am backing up some data, so I added a hitachi 80gig sata150 drive to my board. Its an asus p5wd2. My main sata is a 74gig raptor, then I ...
Summary: I have an 4 year old gateway computer. I bought a new Sony BD-Rom Drive, and a SATA Barracuda Hard drive. I see the hard drive in the BIOS, and I hear...
Summary: I am trying to get windows to see this new sata drive on xp box. drive is there, has data because it was once connected before, all cables and connect...
Summary: Sorry this message will most likely be long, but I hope someone can help me. I have just put this system together and would like to install Windows M...
Summary: Hi, I hope you can help me. I have two existing 40Gb IDE HDDs, set as the 'masters' on IDE channels 1 and 2. The drive on channel 1 is my bootable dri...
Summary: Hi all, I'm thinking about installing a couple of SATA drives in a new computer to get the RAID advantage. I've heard rumors that SATA drives don't g...
Summary: I just got myself a Gigabyte GA-965P-DS3, and I installed a Western Digital SATA hard drive for the main drive, with a Seagate SATA drive for backup. ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
