Summary: Hi, I recently discovered that my 1GB RAM had errors after running a Memory Diagnostic Tool. The RAM my computer takes is DDR PC3200 DDR400. I decided...
Summary: Today i just bought a new Ram (Lemel 256m PC3200) for adding to 512m (old 256m is Kinston Pc3200). but after i had installed it, it takes a long long ...
Summary: Did you check that the RAM you added was compatible with your motherboard ? Not all types of RAM will work with all motherboards Also, it may not be ...
Summary: Hello, I bought an upgrade of RAM for my computer, at the moment I have 2x256MB PC2700, I bought a 512MB PC2700. It inserted fine, but when I booted u...
Summary: A good rule of thumb. If your machine works fine, and you install something new and it stops working fine, take the new thing out. If it goes back to...
Summary: Hi everyone, I recently upgraded to Windows XP from Windows 98 SE. Basically i did this because i'd just installed 632mb new RAM and Windows 98 SE sim...
Summary: did you reboot again after putting in the new ram? I've had some of the same problems with XP. It really really doesn't like different types and o...
Summary: Just did some searching...it may not be a density issue after all. I see your board has 3 slots & accepts a total of 1.5GB or 512mb/slot. However, I a...
Summary: I'm using an asus cuv4x motherboard and have 3 sltots for ram.I decided to add more I HAD 256 meg and tried to add a nother 512 meg stick of ram insta...
Summary: SP3 obviously doesn't come into play until you boot into Windows. The OP wrote "if I put new ram in slots, the laptop will not start". If he can't eve...
Summary: I will try that but I don't think it is a physical ram problem but more like a problem with the program itself. I installed a WinXP update a few days ...
Summary: Download memtest86 a free ram tester. It'll tell you whether you have a ram problem. I had a problem running games because they were getting into a hi...
Summary: Deleting files isn't going to help a RAM problem; RAM is how much memory you have available. The only thing that I can think of is that the scratch d...
Summary: I just bought and upgraded my old 512 SDRAM, to 512 DDR. I exchanged them and the computer worked fine. Later in the Day the computer froze 2 times wh...
Summary: if the computer will boot with the old ram, then the new ram is either no good, or not compatible, or the motherboard won't support that 512 stick. ma...
Summary: Nope... you should be good to go as long as windows recognizes your new RAM.. Right click my computer, go to properties, and look to see how much ram ...
Summary: weird ram problem. AMD 2000+ ECS k7s5a mobo. Runs great on 256 ram. Stick in another 256 it screws up all over the place. The ram works fine. All thre...
Summary: So i got some new ram today, 2 spare sticks of 256mb pc2700 i rescued out of pc we were disposing of today. I only have 1 DIMM slot free so i only p...
Summary: What happens if you remove the new RAM and boot with the old? What Manufacturer/model is your computer? Life's more painless for the brainless....
Summary: Last week I bough 2 more sticks of KVR ddr 400 ram 512 MB, they are Dual channel. I now have 4 stick of this running, which is running dual channel mo...
Summary: When running in dual chanel mode devicemanager reports two CPUs even though there is only one physical CPU. That is normal. The IRQ and other bluescre...
Summary: Ok, my system already has 512mb of DDR SDRAM on board, I want to put another module in. I got the EXACT same kind, but when I install it, my computer...
Summary: Have you tried resetting the BIOS to defaults? Motherboard jumper,or Cmos battery. http://www.dewassoc.com/support/bio... Did you clean the ram slot b...
Summary: Installing RAM is easy, and there's no jumpers to set or settings to change in the BIOS -- the PC automatically recognises the new RAM. The hard bit i...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
