Summary: Having problems installing new memory. at the moment I have 2 256 mb sticks and have 1 new 512 mb stick to install. I clicked it in but my pc fails t...
Summary: Richard: The new memory is CL3 rated. I am guessing the other stuff is a bit lower. The thing is, why doesnt the ram work in my computer when its b...
Summary: Jim: Thanks for your prompt reply. I have tried every tweak that I know in the BIOS - including changing to the recommended latency settings - to get...
Summary: My old ram went bad, borrowing new memory from Best Buy. Same as old 512x2 ddr400, but when I boot the video card doesn't turn on so my monitor stays...
Summary: I am trying to upgrade my Presario 1600 and bought added memory, but for the life of me I can't see where it plugs in???!!! While a new experience ins...
Summary: Hi there. :) My poor PC has been toughing it out for a while on 2 sticks of PC2700 Kingston memory that add up to 512 MBs. I've been running them i...
Summary: I recently added a new 256mb memory card on my computer. The problem is the computer boots up fine but after a few minutes it will shutdown and restar...
Summary: I just bought a new stick of DDR RAM (Kingston brand) and I think it may be resetting my BIOS settings. Can anyone advise? I began with 256 MHz of 266...
Summary: I am going to be building a new computer with an Abit IC7-Max3 motherboard and a Pentium 4 2.8c processor. Right now I am not sure what memory I shou...
Summary: Old M-board had a bad controller. Local shop replaced with a new Aopen (AX4GE-N)board. I asked for 1.5 gb od RAM. It is installed (3 512 modules) but ...
Summary: I've decided to go with DDR2 memory so I don't have to upgrade in a few years. But with the new memory I have to get a new motherboard. I've picked o...
Summary: I installed new RAM in my computer but after the Windows Logo screen, it restarted and it keeps doing this. I went to the PNY website for help and no...
Summary: The memory maybe faulty. It's not that unusual for new memory models. Try as JackG mentioned and first chack it alone. If it will not work but the ...
Summary: I understand your point, but it won't start even with nothing attached. If I have the motherboard with memory, it won't run more than 1-2 seconds, ev...
Summary: I just purchased some new memory for my computer, and now whenever I turn it on, it reaches the part where XP loads and just stops. Black screen... no...
Summary: So let me make sure that I got this clear. Adding extra memory(pc 3200-512 recomended 2700)to the pc even if its the wrong type will not fry the mothe...
Summary: Is the new memory compatible with the board?, and as you know it has to be either SDRAM or DDR SDRAM, not both simultaneously. The board also requires...
Summary: I'm trying to install another 256MB memory modual into my DELL somputer(it already has one 256mb modual). The new memory is exactly the same as the ol...
Summary: I have a 900MHz Duron CPU and a Biostar motherboard. I got a good deal on some PC133 SDRAM memory and decided to replace the PC100 SDRAM I had install...
Summary: My old system was a 2.8 P4 on a ASUS P4P800 mobo that originally had 2 256mb sticks of Kingston HyperX installed in Dual Channel config. I originally ...
Summary: Hello expexrts, I am lame in this, I have one problem I bouth addition chip of memory the same speed 400 mhz 512 and i have already installed 512 two ...
Summary: Thanks Ryan, I ran the program and it indeed does say that the memory is 400 mhz. It also gives me the samsung part number. When I run the part numb...
Summary: I have used some of each brand in diffrent cases, and had no problems. I did have a problem with Kingston memory awhile back (new memory on an older b...
Summary: I just upgraded from 64MB ram to 96MB ram... Upon bootup...my BIOS detected the extra 32MB and read 96MB of RAM...but right after that i received this...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
