Summary: I have an ASUS A7M266 Mobo that has run great thus far with a XP 1500+. I now purchased an XP 2100+ and the machine won't post, beep nothing. I put t...
Summary: I just built the following: Athlon 2500+ ECS L7S7A2 512 MB PC2700 RAM Crucial Chaintech GeForce Ti4200 AGP 8x When I plug the HDD Led cable into the m...
Summary: Need some suggestions please. I believe it's probably a faulty motherboard, but if anyone has any ideas please comment. Motherboard is a GIGABYTE GA-M...
Summary: Hi all, I got an Epox 8K5A2+ board a while ago and its been going beautifully. Today I got hold of a new case and spent the morning transferring all t...
Summary: Hi there, I had a bad burnout on a fanless power supply. It went with a big bang and a bit of smoke. Well, those things can happen but after replacing...
Summary: Okay, the computer was/is an old HP Pavilian 8565C, motherboard is an ASUS P2b-VT, and, after a long couple months of it not working, last night I fou...
Summary: About a month ago i tried to replace the heatsink on my computer. It wouldnt post, and i put the heatsink on the wrong way so i figured that the cpu w...
Summary: Elite® L4S5MG3 motherboard running 2.1 ghz Intel, GeForce 4MX video, 256MB DDR, XP. Daughter was on machine said it locked up in the middle of what s...
Summary: A couple of days ago, I took apart my computer to organize the rat's nest. It's summer and it's getting hot so I thought I'd improve the airflow insi...
Summary: I've heard a lot about the new boards that support a 200MHz bus (KT400 and nForce2) having problems like this, I too have experienced this same proble...
Summary: Just built my first: GigaByte GA-EX58-UD4P motherboard, i7-920 CPU, Corsair 750W power supply, Sythe Mugen 2 cooler. Won't POST. When press power butt...
Summary: I have an ASUS A7V333 Mobo with an Athlon XP2100+. Recently, it wouldn't POST right away and required me to hit the reset button a couple times before...
Summary: I have two identical IBM HDD2517 (810MB). They both will run Win95 on my desktop - Sony Vaio 300MHZ. One will work fine in several different Toshiba...
Summary: I am the brother of the person who posted the 'Won't POST, boots, then no POST' message, December 22, 2003 at 21:30:55 Pacific, I tried what was sugge...
Summary: The computer will work fine with just the 24 pin connector in, but as you can see the problem, it won't post without the 8 pin in. When i plug both in...
Summary: Alright, so I've upgraded my power supply and my processor. PC Power & Cooling 350 / Thermaltake Silent Purepower 420 Athlon XP 2200+ / Athlon XP 2500...
Summary: My friend bought some new RAM for his computer. According to my research he bought the right kind, PC133 SDRAM 64x64 Unbuffered 512MB. However the c...
Summary: I recently bought a new case and moved my motherboard from my old case to the new case. In the new case the motherboard appears to have power. The CPU...
Summary: I just got this upgrade PC (case, power supply, RAM and CPU/MB - ASRock K8Upgrade-VM800) so that I could just slot my HDDs etc in. Problem being that ...
Summary: I just got a new CPU, P4 2.4Ghz, 533Mhz, Socket 478. I installed it into my XFX P4XE-MVB Motherboard and can't get it to post. I contacted XFX via p...
Summary: I handed down my older computer to my younger brother taking out and replacing only the PSU, hard drive, and DVD-rom drive with his own parts from his...
Summary: (This is a repost with a clearer subject header) I just built a brand new system -- the only old components are a 3.25" floppy, a 100MB ZIP drive, a s...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
