Summary: As a new networking student, would like the best resources for the networking commands, as in talking to machine to machine say the standard Linksys/C...
Summary: Hi all, I'm trying to locate the network command thru command prompt to identify a host name by ip address. In simple terms when I'm in command prompt...
Summary: I do give enough information.. when i type in \\entertainment\games it still gives the same error of "A device attached to the system is not function...
Summary: i'd like to know more about network commands for the windows console (ping, net, netstat, etc.) where can i find guides/tutorials for these? ...
Summary: hey newbie to the list here. Anyways, im learning a little bit more about networking commands in dos using windows 98. One another computer, running...
Summary: Does your default gateway show 192.168.0.X ? Assuming you have dynamic DSL, then back to the beginning...did you use the XP Networking Wizard to set t...
Summary: Hi, How do i termintate an active connection from a particular ip? is there any command for it, so that i can use it on dos? thanks regards pk ...
Summary: I have the rig and a data cable (no mgt cable). All the lights are working. I have the MAC address that is printed on the the bottom of the rig but ...
Summary: Thanks. I was hoping for a specific network command that could limit the network speed for each PC. The NIC properties only allow for forcing between...
Summary: quoted form http://www.ChicagoTech.net ... is not accessible Message: "....is not accessible. You may not have permission to use this network resource...
Summary: My computers are both set to run optimally on a windows 98 network, they work fine in windows 98 but when running either command and conquer or red al...
Summary: Okay. First get to a command prompt (Start menu, 'run', type 'cmd') on both computers. type 'ipconfig' at the c:\ and write down the IP address for ...
Summary: First, check and ensure both PC's are using the same workgroup name. On the Vista PC, if it's anything like XP, you would want to create a user accoun...
Summary: I am tying to setup a network between an xp home and a windows98se machine. I can’t use the ‘net diag’ command because it won’t run on the xp ...
Summary: Hi there I am having a problem configuring my FTP server to sucessfully map another computer on my network. I have tried it using the exact network a...
Summary: quoted form http://www.ChicagoTech.net How to ping on the entire subnet For example, to ping 192.168.0.1 to 192.168.0.255, use "FOR /L %i IN (1,1,255...
Summary: if you are still ahving your problem follow these steps... open command prompt... type : netsh int ip reset net press Enter This will clear your Netwo...
Summary: Hi I need a little more detail here, does the wireless router do DHCP? Or is the another computrt on the network doing that? also is there a fixed IP ...
Summary: What a nice guy, give your wife the piece of crap. Just kidding. Actually, it may be that easy. By default, a NIC is set up to obtain an ip address...
Summary: You can go to the ms ftp server and download dos versions of the microsoft netwroking system. then all you have to do is install dos then install the ...
Summary: First, let me say that I am by no means an expert in this field. I will try to explain this as best I can. I've been running 2 computers on a wired n...
Summary: Hello Guys and Girls: I have two desktop PC's running XP Pro and a laptop on wireless also. Hardware: Cable Modem Motorola CyberSurfr SMC Barricade Wi...
Summary: start>run>command.exe to open a dos box ipconfig to show your TCP/IP settings ping 127.0.0.1 as reply means your cards probably ok ping ipaddressofxpm...
Summary: hi, I have a problem. the network shared drives failed to map. The way I did it is that I use a simple batch file using the NET USE command. However, ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
