Summary: I am having trouble installing my PC Card network card on my laptop under NT4, so am having to use Win2000 (which as you can imagine is a bit sluggish...
Summary: Hi I have very weird problem with installing network card on NT 4 I tried to install xircom RE-100 on Toshiba laptop but with no success! i installed ...
Summary: This is a point I cannot drive home enough.. Do not buy cheap network cards! There is a reason 3Com cards cost $85 and Linksys cards cost $20. I'm sur...
Summary: We have a strange network problem on our LAN. At certain times (randomly) our network clients seem to lose their network connection to a server, when ...
Summary: Hey folks, have a problem with my network card. System: NT4.0 sp6, the system recognizes the card but can't start the service because; "error 0031. A ...
Summary: Problems with my DEC DE500 network cards. I have upgraded my Dec 321064 server to Windows NT4 but the Installation only recognises these cards as DEC ...
Summary: I just inserted a Linksys EtherFast 10/100 LAN card into the PCI slot of my HP kayak machine. It's a Pentium 400, dual processor system with 2 SCSI ha...
Summary: I have a box with Windows NT Server 4.0 ( Service pack 4) running with two network cards. I would like the box to act like a router, routing between t...
Summary: Two network cards is no problem under windows nt 4.0, if you think about two things. 1. hardware setup (IRQ and memory settings) 2. The cards can not...
Summary: I needed to reformat my PC and reinstall NT. I have a network card I use only to connect to the internet. NT does not recoginze it even after I have i...
Summary: Hi, I'm working on a Compaq Deskpro 2000, with NT 4.0 and SP4. I just installed NT on it and am having problems getting my network card to work. It is...
Summary: The support desk told us to install a second network card leading to a different internet connection. But. they would not support it nor would they he...
Summary: When I ping the network card on the two computers that I have realtek 8019 on that works but when I try to ping the computer I am trying to connect to...
Summary: I have a box with Windows NT Server 4.0 ( Service pack 4) running with two network cards. I would like the box to act like a router, routing between ...
Summary: I have a Windows 2000 Server with direct internet connection. The server logs into the network and the internet, but after a few minutes the card stop...
Summary: I've got 2 IBM network cards on my PDC. The first one for the Internet is on 100 Mbps Full Duplex and the second, for the LAN is on 100 Half Duplex. ...
Summary: at work we have a server with Win NT installed and 2 network cards. How are 2 Network cards configured on one pc. Any help or relevant websites would ...
Summary: I'm having a problem on our network using Outlook. Now, I can send mail to everyone on the network no problem. And everyone can send mail to me with ...
Summary: I need some help. I have a small network of 15 computers. I have a NT 4.0 Server SP 6 with two of the same model isa 3com network cards installed in ...
Summary: I have installed two network cards in a [H/W] RAID server, running NT and want one IP address to be accessable to the Internet and one to be confined ...
Summary: after I setup nt workstation4.error msg show one service failed.actualy is my network card. my network card is 3com etherlink III ISA 16bit.I go...
Summary: I have a 3Com Etherlink ISA(3C509) network card that I like to find the DOS drivers for. I'm using Norton Ghost Software and I need these DOS drivers...
Summary: I've been trying to setup 3 machines to access my ADSL connection off of nt4 server. But NT won't let me add a second network card.I have a card that ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
