Summary: I've recently bought 2gb RAM but it doesn't work on my computer. Software like CPU-Z and PC Wizard picks it up but it doesn't register with Vista. Aft...
Summary: I've been to the site, but they only show diagrams as HOW to set the speed. What I like to know is what speed I need to use. Now I know 33MHz for PCI ...
Summary: Hey I need help, I just bought a ddr400 memory stick 512mb. It's says its 2.6v. But my mobo says it can "ONLY hold 2.5" What choices do I have? I have...
Summary: Sometimes when I turn on my pc, especially when its still cold, soon after I turned it on it shuts down itself and when I turn it on again the system ...
Summary: Wonder if any experts can help me out with this, i am running on a XP1700+ with 2 PC2100 256DDR = 512 DDR.. Using a K7N2-L series nforce2 mobo. How ca...
Summary: I recently downloaded Motherboard Monitor 5 and need some help if anyone knows about it. First off I followed the directions on displaying the tempera...
Summary: Hi, I have a 1.4 Amd T-bird - shuttle AK11 board - with 512 Ram and vga Sis 315 4x AGP. Everything was running smoothly until last week, I couldn't ru...
Summary: I'm having a problem getting my PC running at the proper speeds. PC Specs: Mobo: ECS L7S7A2 Mobo Proc: AMD 2500+ Barton RAM: Dane-Elec 184 Pin 512MB D...
Summary: well right now im testing some ram which is the 1gb ocz plantium ddr500. put it in my system,3200+, with that ram, BIOSTAR GEFORCE 6100-M9, ok board, ...
Summary: The multiplier is probably locked, so that's not an option. All Bartons run at 1.65v, so there's your default voltage. I wouldn't overvolt too much......
Summary: I've got Abit's motherboard NF7-s, AMD barton 2500+ 333Mhz and Twinmos 512*2 RAM at 3200/400Mhz I don't know what CPU frequenzy and FSB I should use. ...
Summary: Yup, I agree with Sabertooth. I doubt you're gonna find anyone around here backing your decision to spend close to $500 on 2GB, especially when you ca...
Summary: Hi, i need help with 2 cpus, am about to sell one and want your advice of which of them is better to keep: here's te report of cpu-z: (note that cpu1 ...
Summary: I am gonna switch to intel shortly and need some help.I've got everything I need except for cpu,gpu,ram,mobo,psu. I'm selling my 64x2 5000+ mobo,ram,p...
Summary: Running an XP 1800+ with volcano 7 should drop the processor speed to at least 45 or below. I don't understand why but maybe you should try to reappl...
Summary: Hi forum. I need help regarding my motherboard. I have "P6VAP-A+" motherboard. It supports Celeron and PIII proccesors. Curently i have Intel Celeron ...
Summary: Hello, I am hoping someone could give me some help with this unusual problem. I have a Dell Optiplex Gxi 200MHZ 32MB RAM PC. I have received my Gefor...
Summary: hi, i need help in ocing my rig. im new with this so i really need info about this. anyway, i have an msi 746fx board and axp2000, how can i oc it and...
Summary: well i have a mobo of fsb 100Mhz a have a stick of ram that is 256Mb pc133 sdram and 3 sticks of 64Mb pc100 ram with ram is the best??and can i mix th...
Summary: hi i just bought a motherboard combo from compu buzz and so far i'm not impressed. currently it is only running at 1.3 gighz, and i want it at 2.6 gig...
Summary: I'm building a A7V333 mobo with a Athlon XP 2000, I'm using 2700 DDR-RAM. I'm pretty much stumped on what jumper setting to use. I'm not looking to Ov...
Summary: ok, i have the WCPUID downloaded and running, i see Multiplyer as 11.5 if that helps, with it unlocked, approx what could i get too with that and fsb ...
Summary: Hi, my name is Angel I am new to this website, I decided to join when I saw that there were alot of experienced people that helped out. I am looking t...
Summary: I purchased a motherboard to fix an old computer. I tried to install a pentium 3 coppermine 600 but no response (hard drive spins, no beep, fans powe...
Summary: ...frustration...ohh the land of AT motherboards. I really need help with this one, its prolly something simple, but i ran threw all the normal stuff....
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
