Summary: Ok, here is my problem. My harddrive went out on my other computer, so I decided to get a faster harddrive. I asked around and someone recommended a...
Summary: I have a setup where I have one IDE drive, and one SATA drive. I have had no problems whatsoever with them working together. They were automatically d...
Summary: I've seen this Problem on the forum before, but haven't seen a satisfying answer to go with it :) I have a Biostar P4VTB Motherboard with serial raid....
Summary: RAID 0 is where two disk are used to store data. The data is shared between the two disk thus speeding up operations as half the data is written to o...
Summary: I have an old PC with no CD/DVD/BluRay drive at all. i transferred the old PC's HDD into my newer PC. The old PC runs off of IDE ONLY. My new one has ...
Summary: Right now, I have all my IDE slots filled up. (2 ports, 4 devices) I want to add another harddrive. But I wondered could I have SATA and IDE at the sa...
Summary: How about using proper english here. I don't text and the abbreviations are annoying. You CAN use both IDE and SATA drives. You may need to install ...
Summary: I just bought a new barebones system and I need to have my old IDE hard drive because that is where my windows xp is located. I also got a new SATA hd...
Summary: Sorry, but as a parent, I HAVE to comment on the "I can't afford buying hard drives, and ram chips, and cases and motherboard that aren't going to fit...
Summary: After much trouble I decided to try a clean install using only the SATA(N) drive. I booted up in DOS, checked that drive C was the first SATA partitio...
Summary: i need help. i just formated my comp with a windows xp home edition cd and now i lost my graphic and audio drivers. i ran my directx diagnostic tool t...
Summary: I think it may depend on whether you use hardware or software based raid. I only use hardware, and I have both a SATA and IDE raid array. I can't co...
Summary: It doesn't, most transfer rates are at 66mb. The 2 most important things in a HDD is the cache size and rpms. Since almost every desktop hard drive ha...
Summary: Guess it depends on how you are set up. There really isn't much of a difference between SATA and IDE really. If you are using the SATA drive as your ...
Summary: My main HD craped out on me and instead of replacing it with the one they send back, I'm going to upgrade it. What I want to know is; Is there a big ...
Summary: Just a question on the side, can SATA and EIDE work at the same time? Because my computer has both. Why is it reconmended to put my 80GB Drive as a Ma...
Summary: Hey guys first of all, sorry for the bad english, my 3rd language :), So I installed a new motherboard ( Gigabyte eg41mf-us2h). I have 2 IDE hard dr...
Summary: I would suggest you start fron scratch !! Back up your data if you need to and wipe the 160 drive clean and remove any partitions from it that you hav...
Summary: i need help, is there any difference between the sata, ata, and ide connecters, i am about to get a new harddrive, and does all types of hard drives h...
Summary: Heya everyone. Hoping someone can present a solution to yet another hardware problem. So here's the deal: I just built myself a new system and got a 2...
Summary: You need to get an 80 wire IDE cable. The burner won't work properly on the 40 wire cable. SATA and IDE are totally separate so don't worry about t...
Summary: Hey everyone. Just trying to research here whether or not we can achieve a RAID 1 between a SATA and a PATA Hard Drive. We have a computer with impor...
Summary: Hi there, Im after some help in building a new pc. Stuff im carrying over - sata and ide HDD - CD-rom and DVD burner I dont have a lot to spend on it ...
Summary: I have an ASUS A7N8X-E Deluxe motherboard and need to know if I can use one SATA hard drive and one IDE hard drive at the same time. Thanks. Thanks, ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
