Summary: I need a DOS batch file to ping an external list of server by hostname, not IP. Also, I need to have the results piped to another external text file a...
Summary: Hiyas. I am desperately looking for a (preferrably legit and freeware?) pure DOS ping program. I've found a few posts pointing to: http://firststep.ah...
Summary: Pings use the ICMP protocol and doesn't use ports like TCP or UDP. You could block all ICMP packets and that would certainly take care of it. It is p...
Summary: Hello, I have a question about a network that needs to run scripts. currently the small department I work in has NT 4 domain controllers (1 pri, 1 sec...
Summary: i want to learn how to do login scripts and i was hope that someone could help me by getting me started. as my company will need them in the future an...
Summary: Hi Oranda i think this is what you are looking for! Instead of manually pinging all IP addresses on your LAN you can use this nice command: Open Comma...
Summary: Hi again, Ok, so you're getting ping timeouts... what may be causing these are routers along the way to the host you are attempting to ping ( thay may...
Summary: Actually, the "ping of death" was an attack that involved sending a small number of oversized packets to a host. It did not require anything remotely...
Summary: I need the networking disk found on WOWN1.com for dos. I just need disk 1. The computer Im on cant view the site and keeps cradshing, so ifsomeone cou...
Summary: I'm a Computing student in high school in Scotland. I've to design a system to allow 3 managers in a company to share information from their different...
Summary: When you're in the Network and Dial-up Connections window, right-click on the network connection you will be using and left-click on Properties. Click...
Summary: In dos ping the ffollowing address 127.0.0.1 which is the standard IP address for an installed card. this will stand regardless of the IP give by your...
Summary: I have no practical experience at this. but. you would need to get your router to perform DNAT. That is it would have to pass incoming connections fo...
Summary: Hi, I recently got Netgear's router RP614v2 to split my DSL connection between two computers. One of the computers is having this problem: there are c...
Summary: You must understand that ping is next to a totally useless tool. If one can ping at least one way it PROVES that the connection is working both ways. ...
Summary: Check it all out with Helmig at: http://www.helmig.com aka http://www.wown.com and Tim Higgins at: http://www.practicallynetworked.com and another sit...
Summary: Hi, I got confused in a computer networking issue !! Your help will be appriciated. As far as I know, Ping protocol works at lower level than HTTP, ...
Summary: You do need to ping the computers that will tell us a lot. Did you install a software firewall? Are you using a static IP or dynamic IP? Just make ...
Summary: Kid, What you do is enable "TCP/IP" "Client for Microsoft Networks" and "File and print sharing" on both PC's. Then go to the properties of TCP/IP and...
Summary: Do you get a reply when you ping your server? You need to ping each point in route to your server until you don't get a reply. Then at least you'll kn...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
