Summary: Is there a way to get the command prompt on a NW6 server. It doesn't have one. Is there a keystroke I can do or look in another area? Thank you! hdrid...
Summary: Hi, I have a Novell 4.1 file and print server. It was giving me the following message: "User ******* on station 19 cleared by connection watchdog. Co...
Summary: I just put up a new NW6 server and am having problems with slow (very slow) response from the server using IP. If I unbind ip and bind IPX then everyt...
Summary: I've recently built a NW6 server. I'm trying to apply the service packs and seen to come across a problem. During the installation in nwadmin you have...
Summary: Try typing just 'down' at the server prompt and letting the server down itself normally. Wait and see if it still hangs. Normally a NetWare server a...
Summary: I recently loaded a new NW6 server and moved a number of older FoxPro DOS applications to the NW6 box from a NW411 server. On NW6 the FoxPro apps have...
Summary: at the server prompt, type MEMORY (I think that's the command?) and it tells you how much RAM it sees- what does that say? Did you have to enter some...
Summary: or start windows explorer. Select My network places, then select Microsoft Netwok, then you will find the NW6 server with a name like servername_cifs....
Summary: Renaming NW6 Servers dont forget the SYS:ETC/Host and SYS:ETC/Hostname files, any DNS entries and finally in imanager/apache conf files may need to be...
Summary: I will be migrating from NW5 to a new NW6 Server. Is Groupwise 5.5 compatible to run on Netware 6 Server? I asked Novell's CRC and they claimed it ha...
Summary: Hi, we recently try to update our nw6 servers but the flowing error came up the admin account hasn't suffisent rights to extand the schema, what are ...
Summary: Bob, There should be 2 connections for each user when they log onto a 4.x server. To answer your question. At the console server prompt type...
Summary: at the NetWare command prompt: INETCFG From the Internetworking Configuration menu - select Protocols From the Protocol Configuration menu - select TC...
Summary: I downloaded the novell 4.11 serivce pack 9 (nw4sp9.exe) to the server but how do i install it. Do i go to the server and do it at the server prompt ...
Summary: Hi Rachelle, Does your server already have a print server configured ? If you're not sure, check the AUTOEXEC.NCF file for 'LOAD PSERVER ' Unloading i...
Summary: both junky_toof and satik are correct. Nw6 licensing is very different from 4.11. It is user centric not server centric. each user who logs in to the...
Summary: Thanks for the responsebutI don't think that will help. Netware won't even install correctly for me to apply that patch. I set up the DOS environment...
Summary: On Novell 4.1, While installing DAT Drive Server Prompts error "loader cannot find public symbol Npa_get_loaded_module_info load file reference undef...
Summary: This is a tough one....you fire your SysAdmin, then want other SysAdmins to help you for free. Conflicted. Actually, NW does not have a set of DOS-li...
Summary: Hi, During setup, try to avoid the automated detection. Then, once the server is installed, go to the server prompt and use INSTALL.NLM. Let NetWare d...
Summary: Netware Server can be installed on a blank Hard Drive or on a drive that already has a disk operating system and data in place. To install on a blank ...
Summary: Michael you have made a HUGE mistake. As Nutsky points out if you lose a drive your entire server is gone. No access to anything and you start from ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
