Summary: Hi!! Im a novice of Linux. Pls anybody could help me how would i install NIC (Realtek and Cnet) through linux Redhat 6.0 I have its driver in flo...
Summary: howdy, first, the only thing i can do in linux is create a user and install it. i know nothing more... heres my problem, during installation, when ask...
Summary: I need to know how to set my Intel 82557 Ethernet Pro 100 NIC to auto/auto. It probably should be, but I have it hooked to a 10mbit port and I do not ...
Summary: OK,. I found out that I have to use an older kernel in order to get my NIC card to work,. Now I have to get some thing like kernel version 2.2.15 ( I...
Summary: Greetings - I am fairly new to installing linux, and am currently trying to install Red Hat 7.0 on my i486 based machine. I am having problems with g...
Summary: I have been using a Smoothwall firewall very happily for about 12 months now. Unfortunately my RED NIC (embedded Compaq Deskpro NIC) has just failed, ...
Summary: Hi all, been trying to get freesco to work on one of my older comps to try it out. Familar with redhat 6.2 and already use it as firewall/NAT in a few...
Summary: I am using Road Runner and they have provided me with RCA usb modem, do i need a NIC card to run internet on RH 7.2 or i can used the USB connection a...
Summary: Hello!! I have a machine with dual boot Windows NT and Red Hat Linux 7.1 on it. I have one NIC card working on it and connected to Internet. I want t...
Summary: RedHat Linux 7.3 should detect your NIC when you boot it up!!! Well, at least Redhat Linux 7.2 found my cheapo NIC card when I installed it... Lawr...
Summary: two printers were connected with my linux box, then I installed an additional NIC. (the default one is in the motherboard). The system was all runni...
Summary: Problem: Configuring a PCMCIA nic using peanut linux install 2.4.19 on Winbook XL Laptop with a Xircom PCMCIA Card (spec's below). On install, Kudzu d...
Summary: Hi. I set up iptables a couple of weeks ago, and after some trouble it worked the way i wanted. Im using the linux machine as a server/firewall/router...
Summary: Hello, I keep getting Auto-Negotiation unsuccessful, trying force link mode message. NIC is recognized by SuSE but it is unable to get an IP address ...
Summary: Anyone familiar with the 3c501 NIC? Apparently 3com makes anyone who tries to create a driver for this NIC sign an NDA. Therefore, a driver is not l...
Summary: Hi there and hello.....I´m looking for some info on How to install a Surecom NIC..on man8.2...the drivers on the 8.2...does not exist !..What drivers ...
Summary: I installed a 3com 3c905b NIC card into my linux mandrake 9.0 system. Originally had a 3c509 NIC. Every time a go to use the computer it fails to find...
Summary: I neet to evaluate firewall software under Linux on a computer with 3 NIC. I have built machine from old COMPAQ parts with three ISA network cards. Fo...
Summary: Ok Fellas my sob story is I have cable service with charter communications and they only give network access to the mac address of the nic cards they ...
Summary: In linux, how can one determine the rate at with the ethernet NIC connects to the outside world. The NIC supports gigabit ethernet and is talking to G...
Summary: This is not clear: Some linux distros wont let me set my nic card at install, but I just have to set "ipconfig ethx up" and it will nbe up. So I gues...
Summary: Hi, I would like to assign 1 IP address to 2 NICs on the same Red Hat Linux machine for hight aviability. In normal condition, only 1 NIC working, an ...
Summary: I have multiple 3COM 905B NIC cards, Only one of the NICS loads at startup. How do I share the module or update the IRQ setting for ETH1? Thanks ...
Summary: Total Linux newbie here. Someone told me Linux may require special NIC cards and modems...that you cannot just go pick up any old NIC card and have it...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
