Summary: I am setting up an HP 8576C with dual boot 98/NT4 SP 5. The NIC card says it is a HP EN1207D-TX PCI 10/100 Fast Ethernet Adapter in 98. I have tried...
Summary: I am setting up an HP 8576C with dual boot 98/NT4 SP 5. The NIC card says it is a HP EN1207D-TX PCI 10/100 Fast Ethernet Adapter in 98. I have tried...
Summary: please state exactly what diamond stealth video card you're trying to install. each instalation cd i have (for s540 and one older) have a dir for nt ...
Summary: u can set up two nic cards on NT.. i know because my NT is set up that way.. a good source to go to is www.timhiggins.com.. it will show u exactly wha...
Summary: I would like to find a TV Card for NT, So that I can watch TV on it and hook up my camcoder. The ATI TV Wonder card does not support NT. Would appreci...
Summary: Has anyone experience with using a TV tuner card on NT. I just went out and bought the Matrox Marvel G400 TV and can't get it to work. It only support...
Summary: Hi guys...I have this same question posted on the Network forum also... Here's my setup... Cable Internet connection-NO router... Trying to set up my ...
Summary: Hello ..I have a small computer with Windows NT 4.0 on it ..I have a 3Com 3c900b Network card ... I went to instal the driver but it asked me to set ...
Summary: Hi! Congratulations for your site. I have a very important question. The problem is that I have a sound card from Miro, and I need the drivers for Win...
Summary: Does anyone know if there should be any problems installing NT-server on a computer with netcard: 3Com® EtherLink® 100 PCI Fiber Network Interface Car...
Summary: Adaptec SCSI cards are by far the easiest to work with in my experience. NT has a lot of built in native support for the adaptec product line already...
Summary: I am running NT and I have a IBM MWave DSP 16 bit sound card. Are there any drivers for this card for NT? Is there any other way to get the card to wo...
Summary: Hi, I recently dug up an old sound card from Analog Devices (Soundport) model number AD90609. I'm desperately searching for the driver on Windows NT f...
Summary: HELP! I currently have RadioREVEAL ver.1.1 radio card and I can't get it to run under NT. Do you have the drivers for NT and Windows 98? If so could...
Summary: My nic card is automatically detected when installing WinNt4.0, but the second the machine boots up for the first time I get two messages in the event...
Summary: Connecting to a Novell Server using DOS then you must be using a net.cfg file. Just replace the nic card driver name in the link driver line to the on...
Summary: I have two NIC cards installed, 1 for internet access, the other for intranet access. I get online fine but I cannot log onto my local network. I can ...
Summary: depends on type of dual nic card.. if its a compaq card with compaq drivers it can only have a back up ip address if its in a compaq machine,, if in a...
Summary: I am setting up a small network at home beggining with two machines a P90 dualbooted to 95/NT4.0 and a 486 Dx100 running win95. I am looking for somew...
Summary: Is it possible to run one AGP and one PCI video card under NT without losing the ability to use OpenGL. (i.e., without having to resort to using th...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
